version 1.0
AQA GCSE Chemistry (4421)
General Certificate of Secondary Education
Chemistry
Specimen Papers and Mark Schemes
Copyright © 2005. AQA and its licensors. All rights reserved. COPYRIGHT AQA retains the copyright on all its publications. However, registered centres for AQA are permitted to copy material from this booklet for their own internal use, with the following important exception: AQA cannot give permission to centres to photocopy any material that is acknowledged to a third party even for internal use within the centre. The Assessment and Qualifications Alliance (AQA) is a company limited by guarantee registered in England and Wales 3644723 and a registered charity number 1073334. Registered address AQA, Devas Street, Manchester M15 6EX. Dr Michael Cresswell Director General.
Contents
Chemistry (4421)
Chemistry 1a Specimen Paper 5 Key Sheet 34 Chemistry 1b Specimen Paper 37 Key Sheet 66 Chemistry 1F Specimen Paper 69 Mark Scheme 82 Chemistry 1H Specimen Paper 89 Mark Scheme 103 Chemistry 2F Specimen Paper 111 Mark Scheme 126 Chemistry 2H Specimen Paper 131 Mark Scheme 146 Chemistry 3F Specimen Paper 153 Mark Scheme 169 Chemistry 3H Specimen Paper 177 Mark Scheme 190 ISAs Chemistry 1 Testing Concrete Teachers� Notes 200 Skills Assignment 201 Marking Guidelines 209 Chemistry 1 Saturation of Oils Teachers� Notes 212 Skills Assignment 213 Marking Guidelines 220
Contents continued Chemistry 2 Reaction of Limestone Rates Teachers� Notes 222 Skills Assignment 223 Marking Guidelines 230 Chemistry 3 Hardness of Water Teachers� Notes 232 Skills Assignment 233 Marking Guidelines 241
The specimen assessment materials accompanying the new AQA GCSE Sciences specifications are provided to give centres a reasonable idea of the general shape and character of the planned question papers in advance of the first operational examinations.
Specimen Paper CHY1A CHY1A
Surname Other Names
Centre Number Candidate Number
Candidate signature
General Certificate of Secondary Education Specimen Paper SCIENCE A Products from Rocks (Unit Chemistry 1a) Date and Time
For this paper you must have: • a black ball-point pen • an objective test answer sheet
You may use a calculator.
Time allowed: 30 minutes
Instructions • Fill in the boxes at the top of this page. • Check that your name, candidate number and centre number are printed on the separate answer sheet. • Check that the separate answer sheet has the title �Products from Rocks� printed on it. • Attempt one Tier only, either the Foundation Tier or the Higher Tier. • Make sure that you use the correct side of the separate answer sheet; the Foundation Tier is printed
on one side and the Higher Tier on the other. • Answer all the questions for the Tier you are attempting. • Record your answers on the separate answer sheet only. • Do all rough work in this book, not on your answer sheet.
Instructions for recording answers
• Use a black ball-point pen.
• For each answer completely fill in the circle as shown: 1 2 3 4
• Do not extend beyond the circles.
• If you want to change your answer, you must 1 2 3 4 cross out your original answer, as shown:
• If you change your mind about an answer you have crossed 1 2 3 4 out and now want to choose it, draw a ring around the cross as shown:
Information • The maximum mark for this paper is 36.
Advice • Do not choose more responses than you are asked to. You will lose marks if you do. • Make sure that you hand in both your answer sheet and this question paper at the end of the test. • If you start to answer on the wrong side of the answer sheet by mistake, make sure that you cross out
completely the work that is not to be marked.
[5]
Specimen Paper CHY1A
2
You must do one Tier only, either the Foundation tier or the Higher Tier. The Higher Tier starts on page 14 of this booklet.
FOUNDATION TIER
SECTION A
Questions ONE to SIX.
In these questions match the letters with the numbers.
Use each answer only once.
Mark your choices on the answer sheet.
QUESTION ONE
The table is about raw materials and substances made from them.
Match words, A, B, C and D, with the numbers 1 − 4 in the table. A Concrete B Glass C Limestone D Slaked Lime
Substance What we can say about the substance
1 It is made by heating together limestone, sand and soda
2 It is made from cement and used as a building material
3 It is made from quicklime and used to reduce the acidity of soils
4 It is quarried rock used as building material
[6]
Specimen Paper CHY1A Turn over ►
3
QUESTION TWO
The diagram shows the reactivity of some elements.
Reactivity Series Most reactive Calcium
Carbon
Tin
Hydrogen
Gold
Least reactive
Match the words, A, B, C and D, with the numbers 1 � 4 in the table.
A Calcium
B Carbon
C Gold
D Tin
1 A metal that can be extracted from its ore by carbon but not by hydrogen
2 A metal that cannot be extracted from its ore by using carbon
3 A solid non-metal
4 It may be found in the ground as the metal itself
Turn over for the next question
d
[7]
Specimen Paper CHY1A
4
QUESTION THREE The flow chart shows some of the substances that can be made from limestone.
Match words, A, B, C and D, with the spaces 1 � 4 in the flow chart. A Calcium Hydroxide
B Calcium Oxide
C Carbon Dioxide
D Cement
[8]
Specimen Paper CHY1A Turn over ►
5
QUESTION FOUR Atoms join to other atoms to form molecules.
Match formulae, A, B, C and D, with the diagrams 1 � 4. A CO
B H2
C H2O
D NH3
Turn over for the next question
[9]
Specimen Paper CHY1A
6
QUESTION FIVE
We can get useful products from crude oil. Match words, A, B, C and D, with the labels 1 � 4 on the diagram. A Compound
B Fraction
C Mixture
D Molecule
[10]
Specimen Paper CHY1A Turn over ►
7
QUESTION SIX The diagram shows a molecule of hydrogen.
Match words, A, B, C and D, with the spaces 1 � 4 in the sentences. A Bond
B Electron
C Molecule
D Nucleus Each hydrogen atom has a small, central � 1 � .
The two hydrogen atoms each share an � 2 � .
This sharing forms a chemical � 3 � between the two atoms.
The two joined atoms form a � 4 � .
Turn over for the next question
[11]
Specimen Paper CHY1A
8
SECTION B
Questions SEVEN to NINE.
Each of these questions has four parts.
In each part choose only one answer.
Mark your choices on the answer sheet.
QUESTION SEVEN
Producing cement affects the environment.
The drawing shows a cement works next to a limestone quarry.
7.1 Quarrying limestone affects the environment at this site mainly by causing . . .
A air pollution.
B land pollution.
C visual pollution.
D water pollution.
[12]
Specimen Paper CHY1A Turn over ►
9
7.2 Producing cement in the kiln will produce . . .
A air pollution.
B land pollution.
C noise pollution.
D water pollution.
7.3 Producing cement at this site uses . . .
A energy resources only.
B energy resources and renewable materials.
C energy sources and non-renewable materials.
D renewable materials only.
7.4 The cement is transported away from the works by a fleet of lorries.
The lorries cause mainly . . .
A air pollution and land pollution.
B air pollution and noise pollution.
C air pollution and visual pollution.
D air pollution and water pollution.
Turn over for the next question
[13]
Specimen Paper CHY1A
10
QUESTION EIGHT Julie heated some limestone. The limestone decomposed to form calcium oxide and carbon dioxide. The limestone was weighed before and after being heated. The table shows Julie�s results.
Experiment 1 Experiment 2
Mass of limestone before heating in grams
2.00 2.00
Mass of limestone after heating in grams
1.12
Mass lost in grams 0.88 0.90
8.1 Which type of balance would be best for doing this experiment? A 0 � 100 g measuring to the nearest 0.01 g
B 0 � 100 g measuring to the nearest 0.1 g
C 0 � 500 g measuring to the nearest g
D 0 � 1000 g measuring to the nearest 10 g 8.2 What was the mass of limestone after heating in Experiment 2? A 0.88 g
B 0.90 g
C 1.10 g
D 1.12 g
[14]
Specimen Paper CHY1A Turn over ►
11
8.3 What mass of carbon dioxide was formed in Experiment 1? A 0.88 g
B 0.90 g
C 1.10 g
D 1.12 g 8.4 What is the best conclusion to Julie�s experiment? A Heating 2.00 g of limestone results in a loss in mass of 0.88 g.
B Heating 2.00 g of limestone results in a loss in mass of 0.90 g.
C Heating 2.00 g of limestone results in an average loss of 0.89 g.
D Heating 2.00 g of limestone results in a different loss in mass each time.
Turn over for the next question
[15]
Specimen Paper CHY1A
12
QUESTION NINE Most cars use either petrol or diesel as fuel.
The graph gives information about the mass of carbon dioxide produced by different sizes of petrol engine.
9.1 What mass of carbon dioxide is produced by a car with a 2.0 litre petrol engine on a
10 km school run? A 155 g
B 190 g
C 1900 g
D 2350 g
[16]
Specimen Paper CHY1A
13
9.2 What is the best estimate of the mass of carbon dioxide that would be produced by a 1.0 litre petrol engine?
A 60 grams per kilometre
B 125 grams per kilometre
C 140 grams per kilometre
D 170 grams per kilometre
9.3 What is the relationship, if any, between petrol engine size and the mass of carbon dioxide produced? A They are directly proportional.
B They are inversely proportional.
C There is a correlation between engine size and mass of carbon dioxide produced.
D There is no relationship between the two.
9.4 A 2.0 litre diesel engine produces 156 grams of carbon per kilometre.
What is the best conclusion that can be drawn from this?
A Diesel engines produce less carbon dioxide than petrol engines.
B Petrol engines produce less carbon dioxide than diesel engines.
C The mass of carbon dioxide produced by an engine depends on both the size of the engine and the type of fuel.
D The mass of carbon dioxide produced by an engine depends only on the type of fuel.
END OF TEST
[17]
Specimen Paper CHY1A
14
You must do one Tier only, either the Foundation tier or the Higher Tier. The Foundation Tier is earlier in this booklet.
HIGHER TIER
SECTION A
Questions ONE and TWO
In these questions match the letters with the numbers.
Use each answer only once.
Mark your choices on the answer sheet.
QUESTION ONE The diagram shows a molecule of hydrogen.
Match words, A, B, C and D, with the spaces 1 − 4 in the sentences. A Bond
B Electron
C Molecule
D Nucleus
Each hydrogen atom has a small, central � 1 � .
The two hydrogen atoms each share an � 2 � .
This sharing forms a chemical � 3 � between the two atoms.
The two joined atoms form a � 4 � .
[18]
Specimen Paper CHY1A Turn over ►
15
QUESTION TWO Use words from the list to complete the sentences.
A Condense
B Evaporation
C Fractional distillation
D Fractions The many hydrocarbons in crude oil may be separated into � 1 � , each of which contain molecules with a similar number of carbon atoms, by � 2 � of the oil and allowing it to � 3 � at a number of different temperatures. This process is called � 4 � .
Turn over for the next question
[19]
Specimen Paper CHY1A
16
SECTION B
Questions THREE to NINE.
Each of these questions has four parts.
In each part choose only one answer.
Mark your choices on the answer sheet.
QUESTION THREE
Julie heated some limestone. The limestone decomposed to form calcium oxide and carbon dioxide. The limestone was weighed before and after being heated. The table shows Julie�s results.
Experiment 1 Experiment 2
Mass of limestone before heating in grams
2.00 2.00
Mass of limestone after heating in grams
1.12
Mass lost in grams 0.88 0.90
3.1 Which type of balance would be best for doing this experiment? A 0 � 100 g measuring to the nearest 0.01 g
B 0 � 100 g measuring to the nearest 0.1 g
C 0 � 500 g measuring to the nearest g
D 0 � 1000 g measuring to the nearest 10 g 3.2 What was the mass of limestone after heating in Experiment 2? A 0.88 g
B 0.90 g
C 1.10 g
D 1.12 g
[20]
Specimen Paper CHY1A Turn over ►
17
3.3 What mass of carbon dioxide was formed in Experiment 1? A 0.88 g
B 0.90 g
C 1.10 g
D 1.12 g 3.4 What is the best conclusion to Julie�s experiment? A Heating 2.00 g of limestone results in a loss in mass of 0.88 g.
B Heating 2.00 g of limestone results in a loss in mass of 0.90 g.
C Heating 2.00 g of limestone results in an average loss of 0.89 g.
D Heating 2.00 g of limestone results in a different loss in mass each time.
Turn over for the next question
[21]
Specimen Paper CHY1A
18
QUESTION FOUR
Most cars use either petrol or diesel as fuel.
The graph gives information about the mass of carbon dioxide produced by different sizes of petrol engine.
4.1 What mass of carbon dioxide is produced by a car with a 2.0 litre petrol engine on a 10 km school run?
A 155 g
B 190 g
C 1900 g
D 2350 g
[22]
Specimen Paper CHY1A Turn over ►
19
4.2 What is the best estimate of the mass of carbon dioxide that would be produced by a 1.0 litre petrol engine?
A 60 grams per kilometre
B 125 grams per kilometre
C 140 grams per kilometre
D 170 grams per kilometre
4.3 What is the relationship, if any, between petrol engine size and the mass of carbon dioxide produced?
A They are directly proportional.
B They are inversely proportional.
C There is a correlation between engine size and mass of carbon dioxide produced.
D There is no relationship between the two. 4.4 A 2.0 litre diesel engine produces 156 grams of carbon per kilometre.
What is the best conclusion that can be drawn from this?
A Diesel engines produce less carbon dioxide than petrol engines.
B Petrol engines produce less carbon dioxide than diesel engines.
C The mass of carbon dioxide produced by an engine depends on both the size of the engine and the type of fuel.
D The mass of carbon dioxide produced by an engine depends only on the type of fuel.
Turn over for the next question
[23]
Specimen Paper CHY1A
20
QUESTION FIVE This question is about burning and the products of burning. 5.1 About 20 % of the air is �
A carbon dioxide.
B nitrogen.
C oxygen.
D sulfur dioxide. 5.2 When carbon in a fuel burns in air the reaction can be represented by this word equation:
A carbon + oxygen → carbonic acid
B carbon dioxide → carbon + oxygen
C carbon + oxygen → carbon dioxide
D carbon + oxygen → calcium carbonate 5.3 These are the three main substances produced when most fuels are burned: Carbon dioxide
Oil Water (vapour)
Sulfur dioxide
The products of these reactions are all �
A carbonates.
B hydroxides.
C oxides.
D sulfides.
[24]
Specimen Paper CHY1A Turn over ►
21
5.4 Burning fuels release solid particles which �
A cause acid rain. B cause global dimming.
C cause global warming.
D cause water pollution.
Turn over for the next question
[25]
Specimen Paper CHY1A
22
QUESTION SIX
Alloys often have more useful properties than pure metals. 6.1 Mixtures of metals are called . . .
A alloys.
B catalysts.
C compounds.
D ores. 6.2 One metal mixed with iron to make stainless steel is . . .
A aluminium.
B calcium.
C chromium.
D potassium. 6.3 Low carbon steel is . . .
A easily shaped.
B hard.
C resistant to corrosion.
D resistant to staining. 6.4 Smart alloys . . .
A can adapt to new situations.
B can easily be bent.
C can resist most chemicals.
D can return to their original shape after being deformed.
[26]
Specimen Paper CHY1A Turn over ►
23
QUESTION SEVEN The drawings show how hydrogen can be used to displace a metal from one of its compounds.
7.1 In the reaction shown, the hydrogen is . . .
A dehydrated.
B neutralised.
C oxidised.
D reduced.
[27]
Specimen Paper CHY1A
24
7.2 The symbol equation for the reaction is . . .
A Cu + H2 → CuO
B Cu + H2 → CuO + H2O
C CuO + H2 → Cu + H2O
D CuO + H2O → Cu + H2
7.3 Which of these metals could be displaced from its oxide by carbon but not by hydrogen?
A Aluminium
B Lead
C Magnesium
D Sodium 7.4 Which metal cannot be extracted from its oxide using carbon?
A Copper
B Sodium
C Tin
D Zinc
[28]
Specimen Paper CHY1A Turn over ►
25
Turn over for the next question
[29]
Specimen Paper CHY1A
26
QUESTION EIGHT
Crude oil can be separated into fractions.
Each fraction contains several different hydrocarbons.
Fraction of crude oil Number of carbon atoms in each hydrocarbon molecule
Petrol C4 � C12
Paraffin C11 � C15
Diesel oil C14 � C19
Bitumen C50 and upwards
8.1 Crude oil can be separated into fractions by fractional distillation because . . .
A the fractions flow at different rates.
B the fractions have different boiling points.
C the fractions have different colours.
D the fractions have different densities. 8.2 Hydrocarbons with the smallest molecules will be found in . . .
A the bitumen fraction.
B the diesel fraction.
C the paraffin fraction.
D the petrol fraction.
[30]
Specimen Paper CHY1A Turn over ►
27
The formula for hydrocarbon X is C2H6
8.3 The structural formula for hydrocarbon X is . . .
8.4 Which of these hydrocarbons belongs to the same group as hydrocarbon X? A C3H8
B C4H8
C C5H10
D C6H12
Turn over for the next question
[31]
Specimen Paper CHY1A
28
QUESTION NINE Read the information below about recycling metals.
Recycling scrap steel reduces related water pollution, air pollution and mining wastes by about 70 %. It takes four times as much energy to make steel from iron ore than from recycled steel.
Recycling cans made from tin-plated steel saves 74 % of the energy needed to produce these cans from raw materials. 80 % of the tin is recovered from recycled cans.
Every time a tonne of steel is recycled, 2000 kg of iron ore, 500 kg of coal and 20 kg of limestone are conserved.
The recycling process simply involves melting the scrap steel then removing impurities. 9.1 What mass of raw materials is preserved when one tonne of steel is recycled?
A 20 kg
B 500 kg
C 2000 kg
D 2520 kg
9.2 A tin-coated can has a mass of 10 g. 1% of this mass is tin.
How much tin is saved by the recycling of one tin can?
A 0.008 g
B 0.08 g
C 0.8 g
D 8.0g
[32]
Specimen Paper CHY1A
29
9.3 In the manufacture of iron, carbon is used to displace oxygen from iron oxide.
Which pollutant gas is formed during this reaction?
A Carbon dioxide
B Nitrogen
C Oxygen
D Sulfur dioxide
9.4 Recycling scrap needs much less energy than making steel from iron ore.
This is because . . .
A iron in iron ore needs to be oxidised.
B iron in scrap iron has already been displaced from its oxide.
C iron in scrap iron only needs to be oxidised.
D there are fewer impurities in scrap iron.
END OF TEST
Copyright © 2005 AQA and its licensors. All rights reserved.
[33]
Key Sheet CHY1A
GCSE SCIENCE A
OBJECTIVE TEST ANSWER KEY
UNIT CHEMISTRY 1a - FOUNDATION TIER
Question
No. KEY
One 1 � B 2 � A 3 � D 4 � C
Two 1 � D
2 � A 3 � B 4 � C
Three 1 � B
2 � C 3 � D 4 � A
Four 1 � B
2 � A 3 � C 4 � D
Five 1 � B
2 � D 3 � C 4 � A
Six 1 � D
2 � B 3 � A 4 � C
Seven 7.1 � C, 7.2 � A, 7.3 � C, 7.4 � B Eight 8.1 � A, 8.2 � C, 8.3 � A, 8.4 � C Nine 9.1 � C, 9.2 � B, 9.3 � C, 9.4 � C Overall marks = 36
[34]
Key Sheet CHY1A
GCSE SCIENCE A
OBJECTIVE TEST ANSWER KEY
UNIT CHEMISTRY 1a - HIGHER TIER
Question No.
KEY
One 1 � D 2 � B 3 � A 4 � C
Two 1 � D
2 � B 3 � A 4 � C
Three 3.1 � A, 3.2 � C, 3.3 � A, 3.4 � C Four 4.1 � C, 4.2 � B, 4.3 � C, 4.4 � C Five 5.1 � C, 5.2 � C, 5.3 � C, 5.4 � B Six 6.1 � A, 6.2 � C, 6.3 � A, 6.4 � D Seven 7.1 � C, 7.2 � C, 7.3 � B, 7.4 � B Eight 8.1 � B, 8.2 � D, 8.3 � D, 8.4 � A Nine 9.1 � D, 9.2 � B, 9.3 � A, 9.4 � B Overall marks = 36
[35]
This page has been left blank intentionally
[36]
Specimen Paper CHY1B CHY1B
Surname Other Names
Centre Number Candidate Number
Candidate signature
General Certificate of Secondary Education Specimen Paper SCIENCE A Oils, Earth and Atmosphere (Unit Chemistry 1b) Date and Time
For this paper you must have: • a black ball-point pen • an objective test answer sheet
You may use a calculator.
Time allowed: 30 minutes Instructions • Fill in the boxes at the top of this page. • Check that your name, candidate number and centre number are printed on the separate
answer sheet. • Check that the separate answer sheet has the title �Oils, Earth and Atmosphere� printed on
it. • Attempt one Tier only, either the Foundation Tier or the Higher Tier. • Make sure that you use the correct side of the separate answer sheet; the Foundation Tier
is printed on one side and the Higher Tier on the other. • Answer all the questions for the Tier you are attempting. • Record your answers on the separate answer sheet only. • Do all rough work in this book, not on your answer sheet.
Instructions for recording answers
• Use a black ball-point pen. • For each answer completely fill in the circle as shown: 1 2 3 4 • Do not extend beyond the circles. • If you want to change your answer, you must 1 2 3 4
cross out your original answer, as shown: • If you change your mind about an answer you have crossed 1 2 3 4
out and now want to choose it, draw a ring around the cross as shown: Information • The maximum mark for this paper is 36.
Advice • Do not choose more responses than you are asked to. You will lose marks if you do. • Make sure that you hand in both your answer sheet and this question paper at the end of the
test. • If you start to answer on the wrong side of the answer sheet by mistake, make sure that you
cross out completely the work that is not to be marked
[37]
Specimen Paper CHY1B
2
You must do one Tier only, either the Foundation tier or the Higher Tier. The Higher Tier starts on page 14 of this booklet.
FOUNDATION TIER
SECTION A
Questions ONE to SIX.
In these questions match words in the list with the numbers.
Use each answer only once.
Mark your choices on the answer sheet.
QUESTION ONE
The drawing shows the layered structure of the Earth.
Match words, A, B, C and D, with the labels 1 � 4 on the diagram. A Crust
B Inner core
C Mantle
D Outer Core
[38]
Specimen Paper CHY1B Turn over ►
3
QUESTION TWO
The flow diagram shows the reactions of some molecules from crude oil.
Match words, A, B, C, and D, with the labels 1 � 4 on the diagram. A Burning
B Cracking
C Hydrocarbon
D Poly(ethene)
Turn over for the next question
[39]
Specimen Paper CHY1B
4
QUESTION THREE
Plant oils have many uses.
Match words, A, B, C and D, with the spaces 1 � 4 in the sentences. A A fuel
B An emulsion
C Energy
D Temperature Vegetable oil can be burned as �1� .
Vegetable oils are useful foods because they contain a lot of �2� .
Vegetable oils cook food at a higher �3� than water.
In some foods, vegetable oil is mixed with another liquid to form �4� .
[40]
Specimen Paper CHY1B Turn over ►
5
QUESTION FOUR
The pie charts show the gases in the Earth�s early atmosphere and the Earth�s present-day atmosphere.
Match words, A, B, C and D, with the labels 1 � 4 on the diagram. A Ammonia
B Nitrogen
C Noble gases
D Oxygen
Turn over for the next question
[41]
Specimen Paper CHY1B
6
QUESTION FIVE
This question is about tectonic plates.
Match words, A, B, C and D, with the spaces 1 � 4 in the sentences. A Continental drift
B Convection currents
C Radioactive processes
D Volcanic eruptions Wegener suggested that in the past there was a single, large landmass.
This split up and the smaller landmasses moved apart. We call this process �1� .
Tectonic plates move because of �2� in the Earth�s mantle.
The heat required for this movement to occur comes from natural �3� .
At the boundaries between the tectonic plates, there are often �4� .
[42]
Specimen Paper CHY1B Turn over ►
7
QUESTION SIX
The table gives some information about four different vegetable oils. Iodine number is the number of unsaturated bonds in a molecule of the oil. Cetane number is a measure of how easy it is to ignite the oil. Oils with low cetane numbers do not ignite easily. Match words, A, B, C and D, with the numbers 1 � 4 in the table. A The oil which is solid at room temperature
B The oil which would be the hardest to ignite
C The oil with the least double bonds
D The oil with the lowest melting point
Name of oil Melting point in °C Iodine number Cetane number
1 Olive oil −12 60 52
2 Palm oil 35 63 65
3 Rapeseed oil 5 100 45
4 Sunflower oil −18 130 60
Turn over for the next question
[43]
Specimen Paper CHY1B
8
SECTION B
Questions SEVEN to NINE.
Each of these questions has four parts.
In each part choose only one answer.
Mark your choices on the answer sheet.
QUESTION SEVEN
Hydrocarbons with large molecules can be broken down into more useful substances.
7.1 What name is given to this process in which large hydrocarbon molecules are broken down? A Cracking
B Evaluation
C Oxidation
D Polymerisation 7.2 One use of poly(ethene) is to make . . . A crates. B pans.
C plastic bags.
D ropes.
[44]
Specimen Paper CHY1B Turn over ►
9
7.3 Burying waste poly(ethene) is not a good way to get rid of it.
This is because . . . A it does not flow easily.
B it has a high boiling point.
C it is insoluble in water.
D it is not biodegradable.
7.4 When cardboard and paper waste are buried in the ground, they . . . A are broken down by microorganisms.
B are dissolved by soil water.
C ignite spontaneously.
D release sulfur dioxide gas.
Turn over for the next question
[45]
Specimen Paper CHY1B
10
QUESTION EIGHT
Jane used chromatography to investigate the colours used in six different sweets, 1 � 6. A pencil line was drawn near the bottom of the chromatography paper. Jane placed a few drops of extract from each of the foods on this line. The paper was then dipped into some solvent in a beaker.
The diagram below shows the chromatogram obtained at the end of the experiment.
8.1 Which two sweets probably contained the same mixture of dyes? A 1 and 3
B 1 and 5
C 2 and 6
D 3 and 5
[46]
Specimen Paper CHY1B Turn over ►
11
8.2 What is the best conclusion that Jane could draw about sweet 5? A Sweet 5 contains four dyes.
B Sweet 5 probably contains four dyes.
C Sweet 5 contains at least four dyes.
D Sweet 5 contains a maximum of four dyes. 8.3 Which of the following would give the most accurate measure of the distance moved by a dye? A A metre rule
B A micrometer
C A pair of dividers and a millimetre rule
D A piece of 2 mm graph paper 8.4 What is the best way of doing a survey to find which children�s drinks on sale in the UK
contain a particular dye? A Ask mothers at a local toddler group
B Do an internet search
C Look on the shelves in the local supermarket
D Write to as many food manufacturers as you can find in yellow pages
Turn over for the next question
[47]
Specimen Paper CHY1B
12
QUESTION NINE
Read the passage below about cooking with oils.
9.1 Heating oils to smoking point . . . A damages their fatty acid content.
B is best for cooking chips.
C is best for making salad oil.
D turns them into margarine. 9.2 Wet-sauté . . . A damages oils.
B is best for cooking chips.
C is best for saturated oils.
D is best for unsaturated oils.
Cooking at high temperatures can damage oils. The more omega 3 fatty acids in the oil, the less suitable it is for cooking. The heat not only damages the fatty acids, but it can also change them into harmful substances. Hydrogenated oils are often used for cooking. Since these oils have already been �damaged� by chemical processing, they are less likely to be further damaged by heat. The oils that are higher in saturated fats are the most stable when heated. These include peanut oil and olive oil. The more fragile oils are best used at room temperature, like salad dressings. To preserve the nutritious properties and the flavour of unrefined oils, try the �wet-sauté�. Pour around one-fourth of a cup of water in the stir-fry pan and heat just below boiling. Then add the food and cook it a little before adding the oil. Wet-sauté shortens the time oil is in contact with a hot pan. Stir frequently to further reduce the time the oil is in contact with the hot metal. Never heat oils to the smoking point, as this not only damages their fatty acid content but also their taste.
[48]
Specimen Paper CHY1B
13
9.3 A hydrogenated oil . . . A contains hydrogen.
B contains only carbon.
C has a better taste.
D is saturated. 9.4 Hydrogenated oils have been �damaged� by chemical processing.
In this processing, . . .
A unsaturated oils are frozen to make them solid.
B unsaturated oils are gently heated with hydrogen in the presence of a catalyst.
C unsaturated oils are heated to a high temperature.
D vapour from unsaturated oils is passed over a hot catalyst.
END OF TEST
[49]
Specimen Paper CHY1B
14
You must do one Tier only, either the Foundation tier or the Higher Tier. The Foundation Tier is earlier in this booklet.
HIGHER TIER
SECTION A
Questions ONE and TWO.
In these questions match the letters with the numbers.
Use each answer only once.
Mark your choices on the answer sheet.
QUESTION ONE The table gives some information about four different vegetable oils. Iodine number is the number of unsaturated bonds in a molecule of the oil. Cetane number is a measure of how easy it is to ignite the oil. Oils with low cetane numbers do not ignite easily. Match words, A, B, C and D, with the numbers 1 � 4 in the table. A The oil which is solid at room temperature
B The oil which would be the hardest to ignite
C The oil with the least double bonds
D The oil with the lowest melting point
Name of oil Melting point in °C Iodine number Cetane number
1 Olive oil −12 60 52
2 Palm oil 35 63 65
3 Rapeseed oil 5 100 45
4 Sunflower oil −18 130 60
[50]
Specimen Paper CHY1B Turn over ►
15
QUESTION TWO The diagram shows stages in the cracking of hydrocarbons. Match words, A, B, C, and D, with the spaces 1 � 4, to describe what happens in this process. A Hydrocarbons with small molecules
B The hydrocarbons are heated.
C The hydrocarbons are in a vapour state.
D Thermal decomposition of hydrocarbons
Turn over for the next question
[51]
Specimen Paper CHY1B
16
QUESTION THREE
Jane used a chromatography to investigate the colours used in six different sweets, 1 � 6. A pencil line was drawn near the bottom of the chromatography paper. Jane placed a few drops of extract from each of the foods on this line. The paper was then dipped into some solvent in a beaker.
The diagram below shows the chromatogram obtained at the end of the experiment.
3.1 Which two sweets probably contained the same mixture of dyes? A 1 and 3
B 1 and 5
C 2 and 6
D 3 and 5
[52]
Specimen Paper CHY1B Turn over ►
17
3.2 What is the best conclusion that Jane could draw about sweet 5? A Sweet 5 contains four dyes.
B Sweet 5 probably contains four dyes.
C Sweet 5 contains at least four dyes.
D Sweet 5 contains a maximum of four dyes. 3.3 Which of the following would give the most accurate measure of the distance moved by a dye? A A metre rule
B A micrometer
C A pair of dividers and a millimetre rule
D A piece of 2 mm graph paper 3.4 What is the best way of doing a survey to find which children�s drinks on sale in the UK
contain a particular dye? A Ask mothers at a local toddler group
B Do an internet search
C Look on the shelves in the local supermarket
D Write to as many food manufacturers as you can find in yellow pages
Turn over for the next question
[53]
Specimen Paper CHY1B
18
QUESTION FOUR
Read the passage below about cooking with oils.
4.1 Heating oils to smoking point . . . A damages their fatty acid content.
B is best for cooking chips.
C is best for making salad oil.
D turns them into margarine. 4.2 Wet-sauté . . . A damages oils.
B is best for cooking chips.
C is best for saturated oils.
D is best for unsaturated oils.
Cooking at high temperatures can damage oils. The more omega 3 fatty acids in the oil, the less suitable it is for cooking. The heat not only damages the fatty acids, but it can also change them into harmful substances. Hydrogenated oils are often used for cooking. Since these oils have already been �damaged� by chemical processing, they are less likely to be further damaged by heat. The oils that are higher in saturated fats are the most stable when heated. These include peanut oil and olive oil. The more fragile oils are best used at room temperature, like salad dressings. To preserve the nutritious properties and the flavour of unrefined oils, try the �wet-sauté�. Pour around one-fourth of a cup of water in the stir-fry pan and heat just below boiling. Then add the food and cook it a little before adding the oil. Wet-sauté shortens the time oil is in contact with a hot pan. Stir frequently to further reduce the time the oil is in contact with the hot metal. Never heat oils to the smoking point, as this not only damages their fatty acid content but also their taste.
[54]
Specimen Paper CHY1B Turn over ►
19
4.3 A hydrogenated oil . . . A contains hydrogen.
B contains only carbon.
C has a better taste.
D is saturated. 4.4 Hydrogenated oils have been �damaged� by chemical processing.
In this processing, . . .
A unsaturated oils are frozen to make them solid.
B unsaturated oils are gently heated with hydrogen in the presence of a catalyst.
C unsaturated oils are heated to a high temperature.
D vapour from unsaturated oils is passed over a hot catalyst.
Turn over for the next question
[55]
Specimen Paper CHY1B
20
QUESTION FIVE
A molecule of a hydrocarbon, formula C6H14, can be cracked to produce two different hydrocarbons with smaller molecules.
C6H14 → C3H6 + C3H8
Molecule W Molecule Y Molecule Z 5.1 The large hydrocarbon molecule can be cracked by . . . A distillation
B polymerisation.
C thermal decomposition.
D vaporisation. 5.2 The structural formula for molecule Z is . . .
[56]
Specimen Paper CHY1B Turn over ►
21
5.3 Which of the three molecules, W, Y and Z, have double bonds?
A Molecules W and Y
B Molecules W and Z
C Molecule W only
D Molecule Y only 5.4 What types of hydrocarbons are molecules Y and Z?
Molecule Y Molecule Z
A saturated saturated
B saturated unsaturated
C unsaturated saturated
D unsaturated unsaturated
Turn over for the next question
[57]
Specimen Paper CHY1B
22
QUESTION SIX
Carbon is an essential part of all living things and it is often circulated in nature in carbon dioxide.
6.1 Carbon dioxide is removed from the atmosphere when it dissolves in sea water to form soluble . . . A calcium carbonate.
B calcium hydrogencarbonate.
C carbohydrates.
D hydrocarbons. 6.2 The amount of carbon dioxide in the atmosphere is also reduced by . . . A the activity of plants.
B the destruction of forests.
C the eruptions of volcanoes.
D the weathering of limestone. 6.3 Carbon dioxide is released into the atmosphere from volcanoes following the decomposition of . . . A carbonate rocks.
B igneous rocks.
C metamorphic rocks.
D sandstone rocks. 6.4 Recently, the balance between the amount of carbon dioxide released into the atmosphere and
the amount used up has been disturbed.
This is mainly because of . . . A burning of increased amounts of fossil fuels.
B increased volcanic activity.
C planting of large areas of forests.
D the operation of more nuclear power stations.
[58]
Specimen Paper CHY1B Turn over ►
23
QUESTION SEVEN
The diagram shows the present positions of South America and Africa. The position of the boundary between the tectonic plates on which they lie is also drawn.
7.1 The patterns of rocks on the east coast of South America and the west coast of Africa are very
similar.
This suggests that . . . A Africa and South America have been moving slowly towards each other.
B Africa and South America were once together and have been moving slowly away from each other.
C Africa has been slowly sliding beneath South America.
D South America has been slowly sliding beneath Africa. 7.2 Tectonic plates are constantly moving.
This movement is caused by . . . A convection currents.
B the Earth�s crust shrinking.
C the gravitational attraction of the Sun.
D the rotation of the Earth.
[59]
Specimen Paper CHY1B
24
7.3 The interior of the Earth remains hot because of . . . A earthquakes.
B friction between the core and the mantle.
C friction between the moving plates.
D natural radioactive processes. 7.4 The plates move with relative speeds of . . . A a few centimetres a day.
B a few centimetres a week.
C a few centimetres a month.
D a few centimetres a year.
[60]
Specimen Paper CHY1B Turn over ►
25
Turn over for the next question
[61]
Specimen Paper CHY1B
26
QUESTION EIGHT
The drawings represent four different hydrocarbon molecules.
8.1 Which molecule is unsaturated? A Molecule W
B Molecule X
C Molecule Y
D Molecule Z 8.2 Which of the following belong to the alkane family? A Molecules X and Y
B Molecule W only
C Molecules W, X and Z
D Molecules W, Y and Z 8.3 Molecules of X can be joined together to form a polymer.
What is the name of the polymer? A Poly(ethene)
B Poly(vinyl chloride)
C Poly(propene)
D Poly(styrene)
[62]
Specimen Paper CHY1B Turn over ►
27
8.4 Molecules can also be represented by chemical formulae.
For example, molecule W has one carbon atom and four hydrogen atoms and is represented by the formula CH4
The chemical formula for molecule Z is. . . A C4H8
B C10H4
C C4H10
D C4H12
Turn over for the next question
[63]
Specimen Paper CHY1B
28
QUESTION NINE
9.1 How did scientists, who supported the idea that the Earth was cooling, explain the formation of
mountains? A Mountains rose up from the sea bed.
B Mountains were formed by volcanoes.
C The high points of wrinkles formed the mountains.
D The less dense rocks rose above those that were more dense. 9.2 What name was given to Wegner�s theory of crustal movement? A Continental drift
B Continental shrinking
C Mountain building
D Subduction 9.3 Scientists now believe that mountain ranges are formed . . . A by earthquakes.
B by large-scale movements of the Earth�s crust.
C by magma rising from the sea floor.
D by material from the fluid mantle being forced above the crust.
Scientists used to believe that the Earth was cooling. The shrinking core was making the crust wrinkle.
In 1915, Alfred Wegener suggested that all the continents had once been joined together. Later,they had split up and the separate pieces had moved apart.
Few people believed Wegener�s theory. Later, new evidence suggested that the crust was divided into plates which could move slowly. This gave support to Wegener�s theory.
[64]
Specimen Paper CHY1B
29
9.4 New mountain ranges replace older mountain ranges which . . . A are destroyed by earthquakes.
B are destroyed when tectonic plates come together.
C are worn down by weathering and erosion.
D sink back into the mantle.
END OF TEST
Copyright © 2005 AQA and its licensors. All rights reserved.
[65]
Key Sheet CHY1B
GCSE SCIENCE A
OBJECTIVE TEST ANSWER KEY
UNIT CHEMISTRY 1b FOUNDATION TIER
Question
No. KEY
One 1 � C 2 � D 3 � B 4 � A
Two 1 � C
2 � B 3 � A 4 � D
Three 1 � A
2 � C 3 � D 4 � B
Four 1 � A
2 � D 3 � B 4 � C
Five 1 � A
2 � B 3 � C 4 � D
Six 1 � C
2 � A 3 � B 4 � D
Seven 7.1 � A, 7.2 � C, 7.3 � D, 7.4 � A Eight 8.1 � C 8.2 � C 8.3 � C 8.4 � B Nine 9.1 � A 9.2 � D 9.3 � D 9.4 � B
Overall marks = 36
[66]
Key Sheet CHY1B
GCSE SCIENCE A
OBJECTIVE TEST ANSWER KEY
UNIT CHEMISTRY 1b HIGHER TIER
Question No.
KEY
One 1 � C 2 � A 3 � B 4 � D
Two 1 � B
2 � C 3 � D 4 � A
Three 3.1 � C, 3.2 � C, 3.3 � C, 3.4 � B Four 4.1 � A, 4.2 � D, 4.3 � D, 4.4 � B Five 5.1 � C, 5.2 � A, 5.3 � D, 5.4 � C Six 6.1 � B, 6.2 � A, 6.3 � A, 6.4 � A Seven 7.1 � B, 7.2 � A, 7.3 � D, 7.4 � D Eight 8.1 � B, 8.2 � D, 8.3 � A, 8.4 � C Nine 9.1 � C, 9.2 � A, 9.3 � B, 9.4 � C
Overall marks = 36
[67]
This page has been left blank intentionally
[68]
Specimen Paper CHY1F CHY1F
Surname Other Names
Centre Number Candidate Number
Candidate signature
Leave blank
General Certificate of Secondary Education Specimen Paper SCIENCE B Unit Chemistry 1 CHEMISTRY Unit Chemistry 1 Foundation Tier Date and Time
For this paper you must have: • a ruler
You may use a calculator.
Time allowed: 45 minutes Instructions • Use blue or black ink or ball-point pen. • Fill in the boxes at the top of this page. • Answer all questions. • Answer the questions in the spaces provided. • Do all rough work in this book. Cross through any work you do not
want marked. Information • The maximum mark for this paper is 45. • The marks for questions are shown in brackets. • You are expected to use a calculator where appropriate. • You are reminded of the need for good English and clear
presentation in your answers. Advice • In all calculations, show clearly how you work out your answer.
For Examiner�s Use
Number Mark Number Mark
1 5
2 6
3
4
Total (Column 1)
Total (Column 2)
TOTAL
Examiner�s Initials
F
[69]
Specimen Paper CHY1F
2 LEAVE MARGIN BLANK
Answer all questions in the spaces provided.
1 (a) The diagram represents an atom. Choose words from the box to label the diagram.
electrode electron ion molecule nucleus
(2 marks)
(b) When atoms react to form compounds, they become joined by chemical bonds. Complete the sentence about chemical bonds by crossing out the two incorrect words in
the box. When atoms form chemical bonds, it involves giving, taking or sharing . (1 mark)
electronsneutrons protons
3
[70]
Specimen Paper CHY1F Turn over ►
3 LEAVE MARGIN BLANK
2 Alloys have many important uses. (a) State the meaning of the term alloy.
............................................................................................................................................ ............................................................................................................................................
(1 mark)
(b) This wedding ring is made from 18 carat gold. This is an alloy made from gold and silver.
The wedding ring has to last many years when worn every day.
Suggest and explain why the ring is made from an alloy rather than pure gold.
............................................................................................................................................ ............................................................................................................................................
(2 marks) (c) The metal frame of these glasses is made from a smart alloy. This alloy is made from
titanium and nickel.
Give one advantage of making the frame from a smart alloy, instead of an ordinary
metal. ............................................................................................................................................ ............................................................................................................................................
(1 mark)
4
[71]
Specimen Paper CHY1F
4 LEAVE MARGIN BLANK
3 (a) Complete this sentence about crude oil. Crude oil is mainly a mixture of compounds called ............................................................
which contain carbon and hydrogen only. (1 mark)
(b) The diagram shows a laboratory experiment used to separate crude oil.
Complete each sentence by choosing the correct words from the box.
condensation distillation evaporation melting sublimation
The main process taking place at A is ............................................................................. . The main process taking place at B is.............................................................................. .
This method of separating crude oil is called .................................................................. . (3 marks)
(c) Complete this sentence by crossing out the word in each box that is wrong. The first
one has been done for you. This method of separating crude oil works because the the molecules are, the their boiling point and the volatile they are.
(1 mark)
smallerlarger
higher lower
moreless
[72]
Specimen Paper CHY1F Turn over ►
5 LEAVE MARGIN BLANK
(d) (i) The separation of crude oil produces lots of hydrocarbons with large molecules. Choose a word from the box to complete the sentence.
condensing cracking distilling evaporating
At an oil refinery, large hydrocarbons are broken down into smaller molecules by a process called .......................................................................................................... .
(1 mark)
(ii) Some of the small molecules produced can be used to make polymers. Name the polymer made from ethene. ...................................................................................................................................
(1 mark) (e) Crisp packets are often made from a non-biodegradable polymer. Suggest why this:
(i) is good for storing crisps ...................................................................................................................................
...................................................................................................................................
....................................................................................................................................
....................................................................................................................................
(2 marks)
(ii) could be bad for the environment. ................................................................................................................................... ...................................................................................................................................
(1 mark)
10
[73]
Specimen Paper CHY1F
6 LEAVE MARGIN BLANK
4 Limestone is a useful rock. (a) Limestone can be used to make several useful products.
Draw rings around two useful products made from limestone.
cement diesel glass petrol plastic
(2 marks)
(b) A student did some experiments to study limestone. In one experiment, a piece of limestone was heated very strongly as shown in the
diagram.
(i) Suggest one safety precaution that the student should take when doing this experiment.
................................................................................................................................. .................................................................................................................................
(1 mark)
[74]
Specimen Paper CHY1F Turn over ►
7 LEAVE MARGIN BLANK
(ii) When limestone is heated it forms two products; a white powder and a gas. Complete the word equation by choosing the correct product from the list.
heat calcium carbonate ��������������.. + carbon dioxide (limestone)
(1 mark)
(c) The student did another experiment using 2.00 grams of limestone. The limestone was weighed before and after being heated.
The student then repeated this experiment. A new sample of 2.00 grams of limestone was used. The results are shown in the table.
Experiment 1 Experiment 2
Mass of limestone before heating in grams (g) 2.00 2.00
Mass of limestone after heating in grams (g) 1.12 1.10
Mass lost in grams (g) 0.88 0.90
(i) Calculate the average mass lost for the two experiments.
................................................................................................................................. Average mass lost = ................................................ g
(1 mark) (ii) Explain why it was important for the student to repeat this experiment. ...................................................................................................................................
...................................................................................................................................
(1 mark) Question 4 continues on the next page
calcium carbide calcium hydroxide calcium nitride calcium oxide
[75]
Specimen Paper CHY1F
8 LEAVE MARGIN BLANK
(iii) Suggest why the mass lost was not the same for the two experiments.
...................................................................................................................................
................................................................................................................................... (1 mark)
(iv) Explain why a balance which measures to the nearest 0.1 g would not be suitable for
this experiment. ...................................................................................................................................
...................................................................................................................................
(1 mark)
(v) Suggest what mass of carbon dioxide would be produced when 2.00 g of limestone is heated.
Mass of carbon dioxide produced = ........................ g (1 mark)
[76]
Specimen Paper CHY1F Turn over ►
9 LEAVE MARGIN BLANK
(d) The drawing shows a limestone quarry.
(i) Suggest two ways in which the limestone quarry may harm the environment. 1 ................................................................................................................................. ...................................................................................................................................
...................................................................................................................................
2 ................................................................................................................................. ...................................................................................................................................
(2 marks)
(ii) Suggest two ways in which the limestone quarry is of benefit to people. 1 ................................................................................................................................. ................................................................................................................................... 2 ................................................................................................................................. ...................................................................................................................................
(2 marks)
Turn over for the next question
13
[77]
Specimen Paper CHY1F
10 LEAVE MARGIN BLANK
5 (a) The diagram shows the layered structure of the Earth. Complete the diagram by adding the three missing labels.
(3 marks)
(b) The crust and upper mantle are cracked into a number of pieces called tectonic plates.
(i) Explain why these tectonic plates move.
................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ...................................................................................................................................
(2 marks)
(ii) Explain why the movement of the tectonic plates can lead to major disasters.
................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ...................................................................................................................................
(2 marks)
7
[78]
Specimen Paper CHY1F Turn over ►
11
Turn over for the next question
[79]
Specimen Paper CHY1F
12 LEAVE MARGIN BLANK
6 Most cars use either diesel or petrol as their fuel. The table gives information about four cars of the same make and model but with different
sized engines.
Size of engine (litres) Fuel
Carbon dioxide produced (grams of carbon dioxide produced when
the car travels one kilometre)
1.8 petrol 185
2.0 petrol 192
2.5 petrol 235
2.0 diesel 156
[80]
Specimen Paper CHY1F
13 LEAVE MARGIN BLANK
(a) (i) Plot the three points for the petrol engines on the graph paper. (1 mark)
(ii) Draw a straight line of best fit for the three points. (1 mark)
(iii) Extend your line of best fit to estimate the mass of carbon dioxide per kilometre that might be produced by a 1.0 litre petrol engine.
Estimate of mass = ............................................................................................ g/km
(1 mark)
(iv) A student made this conclusion from the data and graph. �The larger the size of the petrol engine, the greater the mass of carbon dioxide
that it produces per kilometre.� Is the data sufficient to be certain of this conclusion? Explain your answer. ...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
(2 marks)
(b) The amount of carbon dioxide in the air is increasing. How might this affect the environment?
............................................................................................................................................ (1 mark)
(c) This statement appeared in a magazine:
�Diesel engines cause less harm to the environment than petrol engines.�
Suggest two different sources of data you could use to test this statement. 1 ......................................................................................................................................... ............................................................................................................................................ 2 ......................................................................................................................................... ............................................................................................................................................ (2 marks)
END OF QUESTIONS
Copyright © 2005 AQA and its licensors. All rights reserved.
8
[81]
Mark Scheme CHY1F
Chemistry 1F Mark Scheme Question 1
answers extra information mark
(a) nucleus
electron
1
1
(b) electrons 1
Total 3
Question 2
answers extra information mark
(a) mixture of metals (owtte) 1
(b) pure gold is soft
would wear quickly
1
1
(c) returns to original shape when bent
1
Total 4
[82]
Mark Scheme CHY1F
Question 3
answers extra information mark
(a) hydrocarbons 1
(b) evaporation
condensation
distillation
1
1
1
(c) lower
and
more
both required for mark 1
(d)(i) cracking 1
(ii) poly(ethene) / polyethene / polythene / polyethylene
1
(e)(i) polymer does not rot / decompose / not broken down by microorganisms
idea of protecting crisps (could be stated in many ways) eg stops crisps from decomposing etc even prevent getting soggy etc
this can be awarded in part (i) or (ii) (but only once)
1
1
(ii) litter / eyesore / harm to animals etc
1
Total 10
[83]
Mark Scheme CHY1F
Question 4
answers extra information mark
(a) cement
glass
1
1
(b)(i) any one from:
• wear safety goggles
• use mat under apparatus
• wear lab coat
1
(ii) calcium oxide 1
(c)(i) 0.89 (g) 1
(ii) to check accuracy etc 1
(iii) experimental error or any other sensible answer
1
(iv) not accurate enough or other sensible answers
1
(v) 0.89 (g) accept 0.88 g / 0.90 g
accept their average from (ii)
1
continued�
[84]
Mark Scheme CHY1F
Question 4 continued
answers extra information mark
(d)(i) any two from:
• dust
• noise
• eyesore
• pollution
• destroys habitats
• lorries along local roads
accept any sensible answer 2
(ii) any two from:
• makes useful products
• named useful products / uses (could get both marks here)
• building material / stone
• employment
• makes money
2
Total 13
[85]
Mark Scheme CHY1F
Question 5
answers extra information mark
(a) mantle
outer core
inner core
1
1
1
(b)(i) convection currents in the mantle
driven by heat released by radioactive processes
1
1
(b)(ii) any two from:
plates may:
• collide
• rub past each other
movement may cause:
• earthquakes
• volcanic eruptions
2
Total 7
[86]
Mark Scheme CHY1F
Question 6
answers extra information mark
(a)(i) accurately plotted points 12± square 1
(ii) sensible attempt at line of best fit no very thick lines / curves / double lines / joining dots
1
(iii) accurately read from their graph 12± square 1
(iv) no � 3 points / readings is not enough
and any one from:
• to plot graph
• to be certain of trend (owtte)
or
no � not a wide enough range (owtte)
and any one from:
• to be certain of trend (owtte)
• bigger smaller engines may not follow same trend
• not a big enough difference between amount of CO2 given out to be sure there is not a difference / could be experimental error
1
1
(b) global warming (owtte) 1
continued�
[87]
Mark Scheme CHY1F
Question 6 continued
answers extra information mark
(c) Any two from:
• own experiments
• text books
• scientific journals
• magazines
• newspapers
• internet
• oil companies / car manufacturers
• TV programmes
• CD rom encyclopaedia
2
Total 8
Overall marks 45
[88]
Specimen Paper CHY1H CHY1H
Surname Other Names
Centre Number Candidate Number
Candidate signature
Leave blank
General Certificate of Secondary Education Specimen Paper SCIENCE B Unit Chemistry 1 CHEMISTRY Unit Chemistry 1 Higher Tier Date and Time
For this paper you must have: • a ruler
You may use a calculator.
Time allowed: 45 minutes Instructions • Use blue or black ink or ball-point pen. • Fill in the boxes at the top of this page. • Answer all questions. • Answer the questions in the spaces provided. • Do all rough work in this book. Cross through any work you do not
want marked. Information • The maximum mark for this paper is 45. • The marks for questions are shown in brackets. • You are expected to use a calculator where appropriate. • You are reminded of the need for good English and clear
presentation in your answers. Advice • In all calculations, show clearly how you work out your answer.
For Examiner�s Use
Number Mark Number Mark
1 5
2 6
3
4
Total (Column 1)
Total (Column 2)
TOTAL
Examiner�s Initials
H
[89]
Specimen Paper CHY1H
2 LEAVE MARGIN BLANK
Answer all questions in the spaces provided.
1 (a) The diagram shows the layered structure of the Earth. Complete the diagram by adding the three missing labels.
(3 marks) (b) The crust and upper mantle are cracked into a number of pieces called tectonic plates.
(i) Explain why these tectonic plates move.
................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ...................................................................................................................................
(2 marks)
(ii) Explain why the movement of the tectonic plates can lead to major disasters.
................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ...................................................................................................................................
(2 marks) 7
[90]
Specimen Paper CHY1H Turn over ►
3
Turn over for the next question
[91]
Specimen Paper CHY1H
4 LEAVE MARGIN BLANK
2 Most cars use either diesel or petrol as their fuel. The table gives information about four cars of the same make and model but with different
sized engines.
Size of engine (litres) Fuel
Carbon dioxide produced (grams of carbon dioxide produced when
the car travels one kilometre)
1.8 petrol 185
2.0 petrol 192
2.5 petrol 235
2.0 diesel 156
[92]
Specimen Paper CHY1H Turn over ►
5 LEAVE MARGIN BLANK
(a) (i) Plot the three points for the petrol engines on the graph paper. (1 mark)
(ii) Draw a straight line of best fit for the three points. (1 mark)
(iii) Extend your line of best fit to estimate the mass of carbon dioxide per kilometre that might be produced by a 1.0 litre petrol engine. Estimate of mass = ............................................................................................ g/km
(1 mark)
(iv) A student made this conclusion from the data and graph. �The larger the size of the petrol engine, the greater the mass of carbon dioxide
that it produces per kilometre.� Is the data sufficient to be certain of this conclusion? Explain your answer. ...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
(2 marks)
(b) The amount of carbon dioxide in the air is increasing. How might this affect the environment?
............................................................................................................................................ (1 mark)
(c) This statement appeared in a magazine:
�Diesel engines cause less harm to the environment than petrol engines.� Suggest two different sources of data you could use to test this statement.
1 ........................................................................................................................................ ............................................................................................................................................ 2 ........................................................................................................................................ ............................................................................................................................................
(2 marks)
8
[93]
Specimen Paper CHY1H
6 LEAVE MARGIN BLANK
3 This information was taken from a label on a packet of margarine. (a) Suggest why eating too much margarine could be bad for health.
............................................................................................................................................ ............................................................................................................................................
(1 mark) (b) To harden margarine, some of the vegetable oils are hydrogenated. How is vegetable oil hydrogenated?
............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................
(2 marks) (c) The margarine contains some unsaturated fat.
(i) What type of chemical bond is present in unsaturated fat that is not in saturated fat?
...................................................................................................................................
(1 mark) (ii) To show that the margarine contains unsaturated fat it can be shaken with bromine
water.
What change would be seen in the colour of the bromine water? ...................................................................................................................................
(1 mark)
Ingredients Vegetable oils; water; hydrogenated vegetable oils; salt; emulsifier; E471; Flavourings; Vitamin E; citric acid; E160a; Vitamins A and D
Nutritional information (per 100g) Energy 2775 kJ Fat 75 g Protein nil saturated fat 27 g Carbohydrate nil unsaturated fat 48 g Fibre nil Sodium 0.94g
5
[94]
Specimen Paper CHY1H Turn over ►
7 LEAVE MARGIN BLANK
4 (a) A student did some experiments to study limestone. In one experiment, a piece of limestone was heated very strongly as shown in the
diagram.
The limestone was converted into quicklime and carbon dioxide. Limestone quicklime + carbon dioxide (i) Complete the symbol equation for this reaction.
CaCO3 ������. + CO2 (1 mark)
(ii) Give the chemical name for quicklime. ...................................................................................................................................
(1 mark)
Question 4 continues on the next page
heat
heat
[95]
Specimen Paper CHY1H
8 LEAVE MARGIN BLANK
(b) A student did another experiment to measure the mass of quicklime formed when 2 grams of limestone was strongly heated.
The limestone was weighed before and after being heated, using a balance reading to the nearest gram.
The results are shown in the table.
Mass of limestone before heating in grams 2
Mass of quicklime formed in grams 1
(i) What mass of carbon dioxide was produced? ......................................................... g
(1 mark)
(ii) Suggest ways in which the student could improve the accuracy and reliability of the measurements.
................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ...................................................................................................................................
(3 marks)
6
[96]
Specimen Paper CHY1H Turn over ►
9 LEAVE MARGIN BLANK
5 Cracking is used in the oil industry to break large hydrocarbon molecules into smaller molecules.
(a) Cracking involves a thermal decomposition reaction. State what must be done to make a thermal decomposition take place.
............................................................................................................................................ (1 mark)
(b) Suggest why air must be excluded from the reactor vessel.
............................................................................................................................................ ............................................................................................................................................
(1 mark)
(c) (i) The equation shows a reaction that can take place in the reactor vessel.
A nonane molecule is split into two smaller molecules. Complete the equation by adding the formula of the other product.
(1 mark) (ii) The product with the formula C2H4 is called ethene. Some ethene is reacted with steam. The equation represents this reaction.
C2H4 + H2O C2H5OH Name the useful product with the formula C2H5OH ...................................................................................................................................
(1 mark)
C9H20 �����. + C2H4nonane
[97]
Specimen Paper CHY1H
10 LEAVE MARGIN BLANK
(d) Modern window frames are often made from uPVC plastic which contains the polymer called poly(chloroethene).
(i) State why plastic window frames need no painting or maintenance.
................................................................................................................................... ...................................................................................................................................
(1 mark)
(ii) Name the monomer that is used to make poly(chloroethene). ...................................................................................................................................
(1 mark) (ii) Explain what is meant by the term polymer. ................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ...................................................................................................................................
(2 marks)
8
[98]
Specimen Paper CHY1H Turn over ►
11 LEAVE MARGIN BLANK
6 Bridges are often made from steel.
(a) Explain, in terms of atoms, why pure iron would be too soft for making bridges. ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................
(2 marks)
(b) The steel used for bridges is an alloy made from iron with a small amount of carbon. Explain, in terms of atoms, how the addition of a small amount of carbon makes the
steel suitable for bridges. ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................
(1 mark)
[99]
Specimen Paper CHY1H
12 LEAVE MARGIN BLANK
(c) The strength of a metal can be tested by measuring the force needed to snap a wire made from the metal. An apparatus that could be used is shown in the diagram. Great care must be taken, since, when the wire snaps, the end of the wire could hit
somebody.
The apparatus is used to compare the strength of two different metals. Suggest two variables that must be controlled in order to make the experiment a fair
test. 1 ......................................................................................................................................... ............................................................................................................................................ 2 ......................................................................................................................................... ............................................................................................................................................
(2 marks)
[100]
Specimen Paper CHY1H Turn over ►
13 LEAVE MARGIN BLANK
(d) Read the information below about the recycling of steel and then answer the questions. (i) Explain why mining iron ore causes environmental problems. ................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ...................................................................................................................................
(3 marks)
Question 6 continues on the next page
Scrap steel reduces related water pollution, air pollution, and mining wastes by about 70 %. It takes four times as much energy to make steel from virgin ore. Recycling steel and tin cans saves 74 % of the energy used to produce them from raw materials. At least 70�80 % of the tin on a can is saved when you recycle it. This cuts down mining waste and preserves a valuable ore source. Every time a ton of steel is recycled, 2500 pounds of iron ore, 1000 pounds of coal and 40 pounds of limestone are preserved. The recycling process involves simply melting the scrap steel and then removing impurities.
[101]
Specimen Paper CHY1H
14 LEAVE MARGIN BLANK
(ii) Explain why as much steel as possible should be recycled. ................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ...................................................................................................................................
(3 marks)
END OF QUESTIONS
Copyright © 2005 AQA and its licensors. All rights reserved.
11
[102]
Mark Scheme CHY1H
Chemistry 1H Mark Scheme Question 1
answers extra information mark
(a) mantle
outer core
inner core
1
1
1
(b)(i) convection currents in the mantle
driven by heat released by radioactive processes
1
1
(ii) any two from:
plates may:
• collide
• rub past each other
movement may cause:
• earthquakes
• volcanic eruptions
2
Total 7
[103]
Mark Scheme CHY1H
Question 2
answers extra information mark
(a)(i) accurately plotted points 12± square 1
(ii) sensible attempt at line of best fit no very thick lines / curves / double lines / joining dots
1
(iii) accurately read from their graph 12± square 1
(iv) no � 3 points / readings is not enough
and any one from:
• to plot graph
• to be certain of trend (owtte)
or
no � not a wide enough range (owtte)
and any one from:
• to be certain of trend (owtte)
• bigger smaller engines may not follow same trend
• not a big enough difference between amount of CO2 given out to be sure there is not a difference / could be experimental error
1
1
(b) global warming (owtte) 1
continued�
[104]
Mark Scheme CHY1H
Question 2 continued
answers extra information mark
(c) any two from:
• own experiments
• text books
• scientific journals
• magazines
• newspapers
• internet
• oil companies / car manufacturers
• TV programmes
• CD rom encyclopaedia
2
Total 8
[105]
Mark Scheme CHY1H
Question 3
answers extra information mark
(a) sensible ideas such as:
obesity (owtte)
heart problems (owtte)
1
(b) addition of hydrogen
and one from:
• with nickel catalyst
• at 60ûC
1
1
(c)(i) double (carbon � carbon) bond 1
(ii) turns colourless do not accept clear
1
Total 5
Question 4
answers extra information mark
(a)(i) CaO 1
(ii) calcium oxide 1
(b)(i) 1 (g) 1
(ii) use a more accurate balance
repeat the experiment
take an average of all the experiments
1
1
1
Total 6
[106]
Mark Scheme CHY1H
Question 5
answers extra information mark
(a) heat 1
(b) sensible ideas such as:
so that the hydrocarbons do not burn /oxidise
so that catalyst does not oxidise
1
(c)(i) C7H16 1
(ii) ethanol 1
(d)(i) not biodegradable / do not rot etc 1
(ii) chloroethene 1
(iii) many small molecules
joined to form a very large molecule
1
1
Total 8
[107]
Mark Scheme CHY1H
Question 6
answers extra information mark
(a) atoms arranged in layers
which can slide over each other
1
1
(b) different sized / carbon atoms in structure distort layers / so more difficult to slide over each other
1
(c) any two from:
• length of wire
• diameter of wire (owtte)
• temperature
2
(d)(i) any three from:
• destroy habitat
• dust caused by the mining gives air pollution
• noise from blasting / machines etc.
• unsightly waste tips
• scarred landscape (owtte)
• waste / minerals etc. carried by rain into water supplies / rivers / lakes etc / causes water pollution
3
continued�
[108]
Mark Scheme CHY1H
Question 6 continued
answers extra information mark
(ii) any three from:
• cost of raw materials or named raw material / raw materials
• produces waste slag
• uses up raw materials / recycling means ores are conserved
• less energy used
• causes more pollution due to waste gases from burning fuels
• blast furnace burns a large quantity of co*ke / energy needed for hot air blast
• energy only needed to melt cans
3
Total 11
Overall marks 45
[109]
This page has been left blank intentionally
[110]
Specimen Paper CHY2F CHY2F
Surname Other Names
Centre Number Candidate Number
Candidate signature
Leave blank
General Certificate of Secondary Education Specimen Paper ADDITIONAL SCIENCE Unit Chemistry 2 CHEMISTRY Unit Chemistry 2 Foundation Tier Date and time
For this paper you must have: • a ruler • the data sheet (enclosed)
You may use a calculator.
Time allowed: 45 minutes Instructions • Use blue or black ink or ball-point pen. • Fill in the boxes at the top of this page. • Answer all questions. • Answer the questions in the spaces provided. • Do all rough work in this book. Cross through any work you do not
want marked. Information • The maximum mark for this paper is 45. • The marks for questions are shown in brackets. • You are expected to use a calculator where appropriate. • You are reminded of the need for good English and clear
presentation in your answers. Advice • In all calculations, show clearly how you work out your answer.
For Examiner�s Use
Number Mark Number Mark
1 5
2 6
3 7
4 Total (Column 1)
Total (Column 2)
TOTAL
Examiner�s Initials
F
[111]
Specimen Paper CHY2F
2 LEAVE MARGIN BLANK
Answer all questions in the spaces provided.
1 Use words from the box to answer each of the questions.
ductile electrons hard ions layers soft
(a)
Diamond is used for cutting tools because it is ������.������. .
(1 mark) (b)
Copper metal can be used for electrical wiring because it has delocalised
������.������. .
(1 mark)
(c)
Graphite can be used in pencils because it has ������������.. which can slide over each other.
(1 mark)
3
[112]
Specimen Paper CHY2F Turn over ►
3 LEAVE MARGIN BLANK
2 The diagram shows a method used to coat a nickel teaspoon with gold.
(a) Draw a ring around the name of the process taking place.
condensation electrolysis neutralisation polymerisation
(1 mark) (b) Why do gold ions move to the teaspoon? ............................................................................................................................................
............................................................................................................................................
(1 mark)
(c) Complete the sentence by crossing out the two words that are wrong in each box. At the teaspoon, the gold ions change into gold atoms by an .
(2 marks)
(d) Suggest why teaspoons are sometimes made by coating a thin layer of gold onto nickel instead of making the teaspoon from pure gold. ............................................................................................................................................ ............................................................................................................................................
(1 mark)
gaining
losing
sharing
electron
neutron
proton
5
[113]
Specimen Paper CHY2F
4 LEAVE MARGIN BLANK
3 Ammonia is made in the Haber process from nitrogen and hydrogen.
Use the flow chart and your knowledge of the Haber process to help you to answer these
questions.
(a) Use words from the box to help you complete the sentence.
air iron limestone natural gas platinum
In the Haber process, nitrogen from .......................................... is reacted with hydrogen from .......................................................... .XXXXXXXXXXXXXXXXXXXXXXXXX The nitrogen and hydrogen are passed over a hot catalyst made of ................................ .
(3 marks)
(b) How is the ammonia turned into a liquid? ............................................................................................................................................
(1 mark)
[114]
Specimen Paper CHY2F Turn over ►
5 LEAVE MARGIN BLANK
(c) Use the flow chart to help you answer these questions. Chemical factories must be very efficient in order to make a profit.
(i) Give three ways in which this reaction is made to take place quickly.
1 ................................................................................................................................ 2 ................................................................................................................................ 3 ................................................................................................................................
(3 marks) (ii) State how the best use is made of:
1. energy
................................................................................................................................... ...................................................................................................................................
(1 mark) 2. chemicals. ...................................................................................................................................
...................................................................................................................................
(1 mark)
(d) Ammonia can be neutralised by an acid to form ammonium nitrate. (i) What type of substance is ammonia?
Draw a ring around the correct answer.
acid alkali neutral salt (1 mark)
(ii) Choose a word from the box to complete the equation for this reaction.
ammonium nitrate nitric nitrogen
Ammonia + ������.������. acid → ammonium nitrate + water
(1 mark)
[115]
Specimen Paper CHY2F
6 LEAVE MARGIN BLANK
(e) Read the information in the box and then answer the questions.
• When plants grow, they use up nitrogen compounds in the soil.
• For centuries, farmers used animal manure as a fertiliser.
• In 1800, the population of the UK was about 10 million people.
• The population of the UK today is about 60 million people.
• Vast quantities of ammonium nitrate can be produced by the chemical industry.
• Ammonium nitrate is an excellent fertiliser.
Explain why large quantities of ammonium nitrate fertiliser are used today. ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................
(3 marks)
14
[116]
Specimen Paper CHY2F Turn over ►
7 LEAVE MARGIN BLANK
4 A student did two experiments using ammonium chloride. (a) In the first experiment, the student heated a small amount of ammonium chloride in a
test tube.
Two reactions take place in the test tube.
Reaction 1 ammonium chloride → ammonia + hydrogen chloride (colourless gases) Reaction 2 ammonia + hydrogen chloride → ammonium chloride
(i) Complete the sentences by crossing out the incorrect word in each box.
Reaction 1 takes place at a temperature.
Reaction 2 takes place at a temperature.
(1 mark) (ii) Draw a ring around the word which best describes Reactions 1 and 2.
combustion displacement oxidation reduction reversible
(1 mark)
(iii) Suggest a reason for the mineral wool at the top of the test tube. ................................................................................................................................... ...................................................................................................................................
(1 mark)
high
low
high
low
[117]
Specimen Paper CHY2F
8 LEAVE MARGIN BLANK
(b) In the second experiment, the student mixed a small amount of ammonium chloride
with some water in a beaker. The temperature of the water was measured before and after adding the ammonium chloride.
The results are shown in the table.
Temperature before adding the ammonium chloride 20 °C
Temperature after adding the ammonium chloride 16 °C
Draw a ring around the word which best describes the process which takes place. combustion displacement endothermic exothermic freezing
(1 mark)
4
[118]
Specimen Paper CHY2F Turn over ►
9
Turn over for the next question
[119]
Specimen Paper CHY2F
10 LEAVE MARGIN BLANK
5 Many foods contain chemical additives. (a) A tin of creamed rice contains sodium carbonate as an acidity regulator.
Sodium carbonate is an ionic compound which contains sodium ions (Na+) and
carbonate ions (CO32−).
Draw a ring around the formula of sodium carbonate. NaCO3 Na2CO3 Na(CO3)2 Na(CO3)3
(1 mark) (b) A tin of red kidney beans contains calcium chloride as a firming agent.
Calcium chloride contains calcium ions (Ca2+) and chloride ions (Cl−). (i) The diagram represents the electronic structure of a chlorine atom.
[120]
Specimen Paper CHY2F Turn over ►
11 LEAVE MARGIN BLANK
Four electronic structures are shown in the box.
Which electronic structure, A, B, C or D, represents a chloride ion (Cl−) ? ...................................................................................................................................
(1 mark)
(ii) Complete the following sentence by crossing out the two words that are incorrect in each box.
A calcium ion (Ca2+) is formed when a calcium atom two .
(2 marks)
Turn over for the next question
gains
loses
shares
electrons
neutrons
protons
4
LEAVE MARGIN BLANK
[121]
Specimen Paper CHY2F
12 LEAVE MARGIN BLANK
6 Solutions A and B are colourless. When they are mixed, they react and turn blue after a period of time. A student investigated how temperature affected the rate of reaction between solutions A and B. The rate was measured by timing how long the mixture took to turn blue at different temperatures. The results are shown in the table.
Temperature in °C 22 25 30 34 45 51
Time taken to turn blue, in seconds 290 250 238 200 170 160
(a) (i) Draw a graph for these results with a line of best fit.
(2 marks)
[122]
Specimen Paper CHY2F Turn over ►
13 LEAVE MARGIN BLANK
(ii) Use your graph to find out how long it takes the solution to turn blue at 40 °C. Time = ............................... s
(1 mark) (b) One of the results is anomalous. (i) Complete this sentence.
The result at ����. °C is anomalous.
(1 mark)
(ii) Suggest two possible causes of this anomalous result. 1 ................................................................................................................................ ................................................................................................................................... 2 ................................................................................................................................ ...................................................................................................................................
(2 marks) (c) Explain, in terms of particles, why increasing the temperature increases the rate of
reaction. ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................
(3 marks)
Turn over for the next question
9
[123]
Specimen Paper CHY2F
14 LEAVE MARGIN BLANK
7 Calcium carbonate tablets are used to treat people with calcium deficiency.
(a) Calculate the relative formula mass (Mr) of calcium carbonate. Relative atomic masses: C = 12; O = 16; Ca = 40. ............................................................................................................................................ ............................................................................................................................................ Relative formula mass = .............................
(2 marks)
(b) Calculate the percentage of calcium in calcium carbonate (CaCO3). ............................................................................................................................................ ............................................................................................................................................ Percentage of calcium = .......................... %
(2 marks)
(c) Calculate the mass of calcium in each tablet. ............................................................................................................................................ ............................................................................................................................................ Mass of calcium = ........................... g
(1 mark)
[124]
Specimen Paper CHY2F
15 LEAVE MARGIN BLANK
(d) An unwanted side effect of this medicine is that it can cause the patient to have �wind� (too much gas in the intestine). The equation below represents the reaction between calcium carbonate and hydrochloric acid (the acid present in the stomach).
CaCO3 (s) + 2HCl (aq) → CaCl2 (aq) + H2O (l) + CO2 (g)
Suggest why the patient may suffer from �wind�. ............................................................................................................................................ ............................................................................................................................................
(1 mark)
END OF QUESTIONS
Copyright © 2005 AQA and its licensors. All rights reserved.
6
[125]
Mark Scheme CHY2F
Chemistry 2F Mark Scheme Question 1
answers extra information mark
(a) hard 1
(b) electrons 1
(c) layers 1
Total 3
Question 2
answers extra information mark
(a) electrolysis 1
(b)
any one from:
• gold ions are positive and spoon is negative
• opposite charges attract / gold ions are attracted to spoon
• positive ions move to negative electrode
1
(c) gaining
electron
1
1
(d) pure gold is very expensive / cheaper to make from nickel with thin coat of gold etc
1
Total 5
[126]
Mark Scheme CHY2F
Question 3
answers extra information mark
(a) air
natural gas
iron
1
1
1
(b) it is cooled 1
(c)(i) high temperature / 450 °C
high pressure / 200 atmospheres
catalyst used
1
1
1
(ii) 1. energy � heat is fed back to heat incoming gases (owtte)
2. raw materials
accept heat is recycled
unreacted nitrogen and hydrogen are recycled
1
1
(d)(i) alkali 1
(ii) nitric 1
(e) any three from:
• big increase in population so need more food
• to grow more food need to replace nitrogen compounds in soil
• not enough animal manure
• large quantities of ammonium nitrate can be produced so farmers can grow more crops
3
Total 14
[127]
Mark Scheme CHY2F
Question 4
answers extra information mark
(a)(i) high
and low
both required for mark 1
(ii) reversible 1
(iii) to stop material spitting out (owtte) 1
(b) endothermic 1
Total 4
Question 5
answers extra information mark
(a) Na2CO3 1
(b)(i) A 1
(ii) loses
electrons
1
1
Total 4
[128]
Mark Scheme CHY2F
Question 6
answers extra information mark
(a)(i) plotting points accurately
sensible smooth curve
± 21 square
must not join dots
1
1
(ii) as read from their graph ± 21 square 1
(b)(i) 30 ( °C) 1
(ii) any two from:
• eg error in timing
• temperature not exactly measured
• different amounts of reagents
• different concentrations of A and B
• any other sensible reason
2
(c) any three from:
• particles gain energy
• move faster
• collide more often
• collide with more force / energy / harder / more successful collisions / more collisions with activation energy
3
Total 9
[129]
Mark Scheme CHY2F
Question 7
answers extra information mark
(a)
40 + 12 + (3 × 16)
= 100
gains 1 mark
gains 2 marks
2
(b) 40 / 100 × 100
= 40 (%)
gains 1 mark
ecf allowed from (a)
for 2 marks
2
(c) 0.5 (g) ecf allowed from (b) 1
(d) carbon dioxide produced 1
Total 6
Overall marks 45
[130]
Specimen Paper CHY2H CHY2H
Surname Other Names
Centre Number Candidate Number
Candidate signature
Leave blank
General Certificate of Secondary Education Specimen Paper ADDITIONAL SCIENCE Unit Chemistry 2 CHEMISTRY Unit Chemistry 2 Higher Tier Date and time
For this paper you must have: • a ruler • the data sheet (enclosed)
You may use a calculator.
Time allowed: 45 minutes Instructions • Use blue or black ink or ball-point pen. • Fill in the boxes at the top of this page. • Answer all questions. • Answer the questions in the spaces provided. • Do all rough work in this book. Cross through any work you do not
want marked. Information • The maximum mark for this paper is 45. • The marks for questions are shown in brackets. • You are expected to use a calculator where appropriate. • You are reminded of the need for good English and clear
presentation in your answers. Advice • In all calculations, show clearly how you work out your answer.
For Examiner�s Use
Number Mark Number Mark
1 5
2 6
3
4 Total (Column 1)
Total (Column 2)
TOTAL
Examiner�s Initials
H
[131]
Specimen Paper CHY2H
2 LEAVE MARGIN BLANK
Answer all questions in the spaces provided.
1 Solutions A and B are colourless. When they are mixed, they react and turn blue after a period of time. A student investigated how temperature affected the rate of reaction between solutions A and
B. The rate was measured by timing how long the mixture took to turn blue at different temperatures. The results are shown in this table.
Temperature in °C 22 25 30 34 45 51
Time taken to turn blue, in seconds 290 250 238 200 170 160
(a) (i) Draw a graph for these results with a line of best fit.
(2 marks)
[132]
Specimen Paper CHY2H Turn over ►
3 LEAVE MARGIN BLANK
(ii) Use your graph to find out how long it takes the solution to turn blue at 40 °C. Time = ............................... s
(1 mark)
(b) One of the results is anomalous. (i) Complete this sentence.
The result at ����. °C is anomalous.
(1 mark)
(ii) Suggest two possible causes of this anomalous result. 1 ................................................................................................................................ ................................................................................................................................... 2 ................................................................................................................................ ...................................................................................................................................
(2 marks)
(c) Explain, in terms of particles, why increasing the temperature increases the rate of reaction. ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................
(3 marks)
Turn over for the next question
9
[133]
Specimen Paper CHY2H
4 LEAVE MARGIN BLANK
2 Calcium carbonate tablets are used to treat people with calcium deficiency.
(a) Calculate the relative formula mass (Mr) of calcium carbonate.
Relative atomic masses: C = 12; O = 16; Ca = 40. ............................................................................................................................................ ............................................................................................................................................ Relative formula mass = .............................
(2 marks)
(b) Calculate the percentage of calcium in calcium carbonate (CaCO3). ............................................................................................................................................ ............................................................................................................................................ Percentage of calcium = .......................... %
(2 marks)
(c) Calculate the mass of calcium in each tablet. ............................................................................................................................................ ............................................................................................................................................ Mass of calcium = ........................... g
(1 mark)
[134]
Specimen Paper CHY2H Turn over ►
5 LEAVE MARGIN BLANK
(d) An unwanted side effect of this medicine is that it can cause the patient to have �wind� (too much gas in the intestine). The equation below represents the reaction between calcium carbonate and hydrochloric acid (the acid present in the stomach).
CaCO3 (s) + 2HCl (aq) → CaCl2 (aq) + H2O (l) + CO2 (g)
Suggest why the patient may suffer from �wind�. ............................................................................................................................................ ............................................................................................................................................
(1 mark)
Turn over for the next question
6
Specimen Paper CHY2H
6 LEAVE MARGIN BLANK
3 The electrolysis of sodium chloride solution is an important industrial process. It produces three useful products.
The apparatus in the diagram can be used to show this electrolysis in the laboratory.
(a) Name Gas A. ...................................................................................................................... (1 mark)
(b) Chloride ions move to the positive electrode. Explain why.
............................................................................................................................................ ............................................................................................................................................
(1 mark)
(c) The solution around the negative electrode becomes alkaline. Name the ion which makes the solution alkaline. ............................................................................................................................................
(1 mark)
(d) This process has very high energy costs. Explain why. ............................................................................................................................................ ............................................................................................................................................
(1 mark)
4
[136]
Specimen Paper CHY2H Turn over ►
7
Turn over for the next question
[137]
Specimen Paper CHY2H
8 LEAVE MARGIN BLANK
4 Ammonia is made from nitrogen and hydrogen in the Haber process.
N2 (g) + 3H2 (g) 2NH3 (g) (+ heat)
[138]
Specimen Paper CHY2H Turn over ►
9 LEAVE MARGIN BLANK
(a) Use information from the page opposite and your knowledge of the Haber process and reversible reactions to help you answer these questions. State which conditions of temperature and pressure would give the highest percentage of ammonia at equilibrium. Explain why. ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................
(4 marks)
(b) The conditions of temperature and pressure which give the maximum yield at equilibrium are not used in industry. Suggest why. ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................
(2 marks) (c) (i) Look carefully at the flow chart and suggest how the process makes the best use
of energy and materials. ................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ...................................................................................................................................
(2 marks)
Question 4 continues on the next page
[139]
Specimen Paper CHY2H
10 LEAVE MARGIN BLANK
(ii) Suggest why it is important to make the best possible use of energy and materials. ................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ...................................................................................................................................
(2 marks)
10
[140]
Specimen Paper CHY2H Turn over ►
11
Turn over for the next question
[141]
Specimen Paper CHY2H
12 LEAVE MARGIN BLANK
5 Silicon is an important element used in the electronics industry. (a) Silicon can be made by heating a mixture of sand (silicon dioxide) with magnesium
powder. The equation for this reaction is shown below.
SiO2 (s) + 2Mg (s) → 2MgO (s) + Si (s)
Calculate the mass of silicon dioxide needed to make 1 g of silicon.
Relative atomic masses: O = 16; Si = 28 ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................ Mass = .............................. g
(3 marks)
(b) The resulting mixture of magnesium oxide and silicon is added to a beaker containing hydrochloric acid. The silicon is then filtered from the solution.
(i) The magnesium oxide reacts with the hydrochloric acid and forms magnesium
chloride (MgCl2) solution and water. magnesium oxide + hydrochloric acid → magnesium chloride solution + water
Write a balanced symbol equation for this reaction, including state symbols. ......................................................................................................................................
(2 marks)
(ii) The gases produced are a mixture of several silicon hydrides.
[142]
Specimen Paper CHY2H Turn over ►
13 LEAVE MARGIN BLANK
One of the gases produced in the reaction is the silicon hydride with the formula SiH4. The structure of this molecule is similar to methane, CH4. Draw a diagram to show the bonding in a molecule of SiH4. Represent the electrons as dots and crosses and show the outer shell (energy level) electrons.
(1 mark)
(c) When this experiment was attempted, only 0.95 g of silicon was obtained instead of the 1 g that had been predicted. (i) Calculate the percentage yield of silicon in this experiment.
................................................................................................................................... ................................................................................................................................... Percentage yield of silicon = ........................ %
(1 mark) (ii) Suggest one reason for the yield being less than 100 %.
................................................................................................................................... ...................................................................................................................................
(1 mark) 8
[143]
Specimen Paper CHY2H
14 LEAVE MARGIN BLANK
6 The drawing shows a high quality wire used to make electrical connections on a hi-fi system.
(a) Copper is used because it is a very good conductor of electricity. Copper is a typical
metal. (i) Describe the structure and bonding in a metal. You may wish to draw a diagram
to help you answer this question.
................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ...................................................................................................................................
(3 marks) (ii) Explain, by reference to your answer to part (a)(i), why copper conducts
electricity. ................................................................................................................................... ...................................................................................................................................
(1 mark)
[144]
Specimen Paper CHY2H
15 LEAVE MARGIN BLANK
(iii) Explain, by reference to your answer to part (a)(i), why copper can be drawn into wires. ................................................................................................................................... ...................................................................................................................................
(1 mark)
(b) The copper used to make this wire is �OFC� copper. This stands for �oxygen free copper�.
(i) It is thought that when molten copper is cooled and solidified, it can take in some
oxygen from the air. This may slightly decrease the conductivity of the copper. Suggest why the conductivity might be decreased. ................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ...................................................................................................................................
(2 marks)
(ii) To make it oxygen free, the copper is heated in an atmosphere of hydrogen. Explain how this will remove the oxygen. ................................................................................................................................... ...................................................................................................................................
(1 mark)
END OF QUESTIONS
Copyright © 2005 AQA and its licensors. All rights reserved.
8
[145]
Mark Scheme CHY2H
Chemistry 2H Mark Scheme Question 1
answers extra information mark
(a)(i) plotting points accurately
sensible smooth curve
± 21 square
must not join dots
1
1
(ii) as read from their graph ± 21 square 1
(b)(i) 30 (°C) 1
(ii) any two from:
• eg error in timing
• temperature not exactly measured
• different amounts of reagents
• different concentrations of A and B
• any other sensible reason
2
(c) any three from:
• particles gain energy
• move faster
• collide more often
• collide with more force / energy / harder / more successful collisions / more collisions with activation energy.
3
Total 9
[146]
Specimen Paper CHY2H
Question 2
answers extra information mark
(a)
40 + 12 + (3 × 16)
= 100
gains 1 mark
gains 2 marks
2
(b) 40 / 100 × 100
= 40 (%)
gains 1 mark
ecf allowed from (a)
for 2 marks
2
(c) 0.5 (g) ecf allowed from (b) 1
(d) carbon dioxide produced 1
Total 6
Question 3
answers extra information mark
(a) hydrogen 1
(b) they have a negative charge accept opposite charges attract etc 1
(c) hydroxide 1
(d) cost of electricity 1
Total 4
[147]
Mark Scheme CHY2H
Question 4
answers extra information mark
(a)
low / lower / lowest temperature (or 100 °C from graph)
any one from:
• (forward) reaction exothermic
• if the temperature is increased the yield of product will decrease or reaction right to left
high / higher / highest pressure (or greater than 450 atm, from graph)
any one from:
• four reactant molecules but only two product molecules (owtte)
• increase in pressure favours the reaction which produces the least number of molecules
2 marks for comments related to temperature
ignore reference to catalyst
2 marks for comments relating to pressure
reverse reaction goes from 2 molecules / moles / volumes to 4 molecules / moles / volumes
decrease in pressure favours the back reaction because it produces the most molecules
1
1
1
1
(b) at low temperatures the reaction is too slow
high pressures could be dangerous / expensive
accept compromise between yield and rate
450 °C gives a reasonable yield at a reasonable rate
catalyst does not work at low temperatures
accept 200 atmospheres gives a reasonable yield at reasonable cost / safely
for 1 mark 450 °C and 200 atmospheres are compromise conditions
1
1
continued�
[148]
Specimen Paper CHY2H
Question 4 continued
answers extra information mark
(c)(i) heat is recycled / heat from the reactor is used to heat gases going into the reactor
unreacted nitrogen and hydrogen are recycled
1
1
(ii) sensible comment related to conservation of energy
sensible comment related to conservation of materials
eg cost of energy pollution aspects of burning fuels to provide energy etc.
eg cost of materials
cost of converting raw materials into nitrogen and hydrogen
natural gas is non-renewable source
1
1
Total 10
[149]
Mark Scheme CHY2H
Question 5
answers extra information mark
(a) Mr (SiO2) = 60
60 g SiO2 → 28 g Si
2.14 g SiO2 → 1g Si
Mr (SiO2) = 60
moles of silicon needed = 28
1 = 0.0357
mass of SiO2 needed = 0.0357 × 60
= 2.14g
Mr (SiO2) = 60
mass SiO2 = 1 × ⎟⎠⎞
⎜⎝⎛
28
60
= 2.14 g
correct answer gains 3 marks
if Mr incorrect ecf max 2
allow 2, 2.1, 2.14 (or anything rounding to 2.14), 2.16 or 2.2
a unit is not required but an incorrect unit loses the third mark
1 mark
1 mark
1 mark
allow 2, 2.1, 2.14 (or anything rounding to 2.14), 2.16 or 2.2
1 mark
1 mark
1 mark
allow 2, 2.1, 2.14 (or anything rounding to 2.14), 2.16 or 2.2
3
continued�
[150]
Specimen Paper CHY2H
Question 5 continued
answers extra information mark
(b)(i) MgO (s) + 2HCl (aq) → MgCl2 (aq) + H2O (l)
penalise incorrect symbols
correctly balanced equation gains 1 mark
state symbols gains 1 mark
allow correct multiples / fractions
2
(ii) •x
H
H x• Si x
• H
•x
H
ignore inner shell electrons of silicon
allow correct drawings without symbols
must clearly indicate four shared pairs of electrons with one electron from each atom
1
or
(c)(i) 95 (%) 1
(ii) any one from:
• sensible ideas such as:
• sand contains impurities / it is not pure
• silicon dioxide
• silicon hydrides also produced
• loss of product during filtering etc
1
Total 8
[151]
Mark Scheme CHY2H
Question 6
answers extra information mark
(a)(i) layers / lattice / giant structure / regular pattern of atoms (diagram)
outer (shell) electrons
(free to) move (through whole structure)
allow layers / lattice / giant structure / regular pattern of ions
do not accept particles
accept valence electrons
accept delocalised / mobile / free
1
1
1
(ii) the free electrons (allow the metal to conduct electricity)
accept electrons move / mobile / delocalised
1
(iii) atoms / ions / layers can slide / slip / move over each other
1
(b)(i) copper oxide formed or Cu reacts with oxygen or Cu is oxidised
this is a poor conductor or gets in the way of free moving electrons or fewer mobile electrons
or
oxygen atoms / oxygen molecules / oxide ions in metal
prevents / disrupts flow of electrons / current or fewer mobile electrons
do not accept electricity
do not accept oxygen pockets / bubbles
do not accept macro explanations
do not accept electricity
1
1
(ii) any one from:
• hydrogen reacts with oxygen
• water is formed
• hydrogen reduces copper oxide etc
1
Total 8
Overall marks 45
[152]
Specimen Paper CHY3F CHY3F
Surname Other Names
Centre Number Candidate Number
Candidate signature
Leave blank
General Certificate of Secondary Education Specimen Paper CHEMISTRY Unit Chemistry 3 Foundation Tier Date and Time
For this paper you must have: • a ruler • the data sheet (enclosed)
You may use a calculator.
Time allowed: 45 minutes Instructions • Use blue or black ink or ball-point pen. • Fill in the boxes at the top of this page. • Answer all questions. • Answer the questions in the spaces provided. • Do all rough work in this book. Cross through any work you do not
want marked. Information • The maximum mark for this paper is 45. • The marks for questions are shown in brackets. • You are expected to use a calculator where appropriate. • You are reminded of the need for good English and clear
presentation in your answers. Advice • In all calculations, show clearly how you work out your answer.
For Examiner�s Use
Number Mark Number Mark
1 5
2 6
3 7
4 8 Total (Column 1)
Total (Column 2)
TOTAL
Examiner�s Initials
F
[153]
Specimen Paper CHY3F
2 LEAVE MARGIN BLANK
Answer all questions in the spaces provided.
1 This label was on a bottle of lemonade.
(a) Carbonated water is made by dissolving a gas in water. Draw a ring around the name of this gas.
carbon monoxide carbon dioxide hydrogen oxygen
(1 mark) (b) Complete the sentence by crossing out the two words that are wrong. To make as much of this gas as possible dissolve in water, the temperature should be and the pressure should be . .
(1 mark) (c) Choose one substance from the other ingredients on the label that produces hydrogen
ions (H+(aq)) when dissolved in water.
............................................................................................................................................ (1 mark)
3
high low
high low
[154]
Specimen Paper CHY3F Turn over ►
3 LEAVE MARGIN BLANK
2 Choose from the list in the box the part of the periodic table to which each element belongs. The periodic table on the Data Sheet may help you to answer this question. Group
1 Group
2 Transition elements
Group 3
Group 4
Group 5
Group 6
Group 7
Group 0
(a) A green/yellow gas which is a non-metal. It forms ions with a 1− charge. It is in ..................................................................................................................................
(1 mark)
(b) The atoms of this element have 12 protons in the nucleus. It is in .................................................................................................................................
(1 mark)
(c) A soft metal which is shiny when cut. It forms ions with a 1+ charge. It is in ..................................................................................................................................
(1 mark) (d) A shiny metal with a high melting point. It forms coloured compounds and is often
used as a catalyst. It is in ..................................................................................................................................
(1 mark)
Turn over for the next question
4
[155]
Specimen Paper CHY3F
4 LEAVE MARGIN BLANK
3 Cod can be cooked by steaming or by deep frying in fat.
The table shows the energy available from a 200 g portion of steamed cod and a 200 g portion
of deep fried cod.
Mass of cod in grams
Energy available in calories
Energy available in joules
Steamed cod 200 g 160 672
Deep fried cod 200 g 410 ?
(a) The energy available in calories can be converted to joules using the equation shown
below.
Energy in joules = Energy in calories × 4.2 Use this equation to help you to calculate the energy available in joules from 200 g of
deep fried cod. ............................................................................................................................................ Energy available from 200 g of deep fried cod = .................................J
(1 mark)
(b) Explain why deep fried cod has a lot more available energy than the steamed cod. ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................
(2 marks)
[156]
Specimen Paper CHY3F Turn over ►
5 LEAVE MARGIN BLANK
(c) Suggest why eating too much deep fat fried food could be bad for your health.
............................................................................................................................................ ............................................................................................................................................
(1 mark)
Turn over for the next question
4
[157]
6
There are no questions printed on this page
[158]
Specimen Paper CHY3F Turn over ►
7 LEAVE MARGIN BLANK
4 The diagram shows an experiment to study the reaction of lithium with water.
(a) Describe, as fully as you can, what you would see as the lithium reacts with the water in
this experiment. ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................
............................................................................................................................................ ............................................................................................................................................
(3 marks) (b) The reaction has two products. Complete the word equation for this reaction by
choosing the correct substances from the box. Lithium + water → ����������������. + �������������
(2 marks)
hydrogen lithium hydride oxygen lithium lithium hydroxide
[159]
Specimen Paper CHY3F
8 LEAVE MARGIN BLANK
(c) Caesium is lower down in Group 1 of the Periodic Table than lithium. Complete this sentence by crossing out the words in the box that are wrong. Caesium lithium.
(1 mark) (d) The graph shows the melting points of the Group 1 metals plotted against the atomic
numbers.
is less reactive than is more reactive than has the same reactivity as
[160]
Specimen Paper CHY3F Turn over ►
9 LEAVE MARGIN BLANK
(i) Describe fully how the melting points change as the atomic number increases.
................................................................................................................................... ................................................................................................................................... ...................................................................................................................................
(2 marks) (ii) Francium has an atomic number of 87. Use the graph to estimate the melting point of francium. Estimate of melting point .......................................... °C
(1 mark)
Turn over for the next question
9
[161]
Specimen Paper CHY3F
10 LEAVE MARGIN BLANK
5 A chemist used a titration to investigate a solution used to unblock drains.
25cm3 of a diluted solution of Drain Opener was put into a beaker. The graph shows how the pH of this solution changed as hydrochloric acid was slowly added.
[162]
Specimen Paper CHY3F Turn over ►
11 LEAVE MARGIN BLANK
(a) What volume of hydrochloric acid was needed to neutralise the Drain Opener solution? Volume = ............................................... cm3
(1 mark) (b) Which of the following best describes Drain Opener solution?
Draw a ring around your answer.
neutral strong acid strong alkali weak acid weak alkali
(1 mark)
(c) Which of the following would be best for accurately measuring the volume of hydrochloric acid added? Draw a ring around your answer,
beaker burette measuring cylinder pipette
Give a reason for your choice. ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................
(2 marks)
Turn over for the next question
4
[163]
Specimen Paper CHY3F
12 LEAVE MARGIN BLANK
6 Chemical tests can be used to identify compounds.
(a) List A gives the names of four compounds in solution. List B gives tests and the result of the tests.
Draw a straight line from each compound in List A to its test and result of the test in
List B. The first one has been done for you.
(2 marks)
(b) State what you would see when sodium hydroxide solution reacts with copper sulfate
solution. ............................................................................................................................................ ............................................................................................................................................
(2 marks) (c) (i) Name one instrumental method which can be used to help in the identification of
substances.
................................................................................................................................... ...................................................................................................................................
(1 mark)
(ii) Suggest one advantage of the instrumental method you have named. ...................................................................................................................................
(1 mark)
6
[164]
Specimen Paper CHY3F Turn over ►
13 LEAVE MARGIN BLANK
7 The diagram shows a simplified flow diagram of a water treatment works which supplies drinking water.
(a) Explain the purpose of: (i) filtration ................................................................................................................................... ...................................................................................................................................
(ii) chlorination. ................................................................................................................................... ...................................................................................................................................
(2 marks)
(b) Samples of the treated water must be tested at regular intervals.
(i) Suggest why. ................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ...................................................................................................................................
(2 marks)
Question 7 continues on the next page
[165]
Specimen Paper CHY3F
14 LEAVE MARGIN BLANK
(ii) Suggest how the use of ICT and/or data logging equipment could help with this testing. ................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ...................................................................................................................................
(2 marks)
(c) Drinking water can also be produced using distillation. Explain why this process is expensive. ............................................................................................................................................ ............................................................................................................................................
(1 mark)
(d) In some parts of the country the water supplied to homes is hard water.
(i) Name one ion that can make water hard. ...................................................................................................................................
(1 mark)
(ii) Explain how hard water can affect central heating systems. ................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ...................................................................................................................................
(2 marks)
(iii) State one advantage of hard water. ...................................................................................................................................
(1 mark)
11
[166]
Specimen Paper CHY3F Turn over ►
15 LEAVE MARGIN BLANK
8 The table shown below was devised by John Newlands in 1864. He arranged the elements in order of their relative atomic masses. He found a repeating pattern, with elements having similar properties in the vertical columns (Groups). He called this pattern the �Law of Octaves�, because elements with similar properties seemed to be repeated every eighth element.
H Li Be B C N O
F Na Mg Al Si P S
Cl K Ca Cr Ti Mn Fe
Co/Ni Cu Zn Y In As Se
Br Rb Sr Ce/La Zr Di/Mo Ro/Ru
Pd Ag Cd U Sn Sb Te
I Cs Ba/V Ta W Nb Au
Pt/Ir Tl Pb Th Hg Bi Os
(a) Many scientists were critical of Newlands� Law of Octaves. Suggest why other scientists in 1864 were critical of the Law of Octaves.
You should give examples from the table and use your knowledge of the chemistry of
the elements. ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................
(3 marks)
Question 8 continues on the next page
[167]
Specimen Paper CHY3F
16 LEAVE MARGIN BLANK
(b) The diagram below shows a version of Mendeleev�s Periodic Table of 1871. Mendeleev placed most of the elements in order of relative atomic mass.
H
Li Be B C N O F
Na Mg Al Si P S Cl
K Cu
Ca Zn
? ?
Ti ?
V As
Cr Se
Mn Br Fe Co Ni
Rb Ag
Sr Cd
Y In
Zr Sn
Nb Sb
Mo Te
? I Ru Rh Pd
This table became accepted by other scientists. Give one way in which Mendeleev�s table improved on Newlands� table. . ........................................................................................................................................... .. ..........................................................................................................................................
(1 mark)
END OF QUESTIONS Copyright © 2005 AQA and its licensors. All rights reserved.
4
[168]
Mark Scheme CHY3F
Chemistry 3F Mark Scheme Question 1
answers extra information mark
(a) carbon dioxide 1
(b) low
and
high
both required for mark 1
(c) citric acid 1
Total 3
Question 2
answers extra information mark
(a) group 7 1
(b) group 2 1
(c) group 1 1
(d) transition metals 1
Total 4
Question 3
answers extra information mark
(a) 1722 (J) accept 1.722 kJ (unit must be given)
1
(b) cooked in fat
fat very high in energy
1
1
(c) obesity etc 1
Total 4
[169]
Mark Scheme CHY3F
Question 4
answers extra information mark
(a) any three from:
• floats
• fizzes / bubbles or produces a gas
• indicator goes blue / purple / violet (alkaline colour)
• water level in test tube goes down or gas fills the test tube
• lithium dissolves (owtte)
• moves around (on surface of water)
• steam
3
(b) lithium hydroxide
hydrogen
1
1
(c) is more reactive than 1
(d)(i) decreases
and then slows or levels off
1
1
(ii) 26 ( ° C) 1
Total 9
[170]
Mark Scheme CHY3F
Question 5
answers extra information mark
(a) 25 (cm3) 1
(b) strong alkali 1
(c) burette
plus any sensible reason:
eg
• more accurate
• smaller divisions
• tap allows better control
etc
1
1
Total 4
[171]
Mark Scheme CHY3F
Question 6
answers extra information mark
(a)
all correct = 2 marks
one or two correct = 1 mark
2
(b) blue
precipitate
accept solid formed
1
1
(c)(i) any one sensible method:
eg
• infra red spectroscopy
• nmr / mass spectroscopy
etc
1
(ii) any one from:
• detect very small amounts / sensitive
• fast
• accurate
etc
1
Total 6
[172]
Mark Scheme CHY3F
Question 7
answers extra information mark
(a)(i) to remove solids 1
(ii) to kill germs / bacteria / microbes etc
1
(b)(i) any two from:
• check for dissolved minerals
• check for microbes
• which could be harmful to health
2
(ii) any two sensible answers such as:
• monitor continuously
• record results
• immediate graphical display
• take samples automatically
etc
2
(c) cost of fuel / heat etc 1
(d)(i) calcium / magnesium accept symbols 1
(ii) produces scale (owtte)
reduces efficiency / blocks pipes etc
1
1
(iii) any sensible reason
eg
good for health
1
Total 11
[173]
Mark Scheme CHY3F
Question 8
answers extra information mark
(a) comment + relevant example
gains 1 + 1 marks
third marking point can be either a comment or an example unrelated to first comment ie 3 comments would be max 2 marks
(could be many answers)
eg many elements in the groups have very dissimilar properties eg Cu + K gains 2 marks
two elements in one place on the table eg Ce or La gains 2 marks
no clear division between metals and nonmetals or metals and non-metals jumbled / mixed up (could give example from table)
Newlands didn�t allow spaces for new elements
ignore references to music 3
continued�
[174]
Mark Scheme CHY3F
Question 8 continued
answers extra information mark
(b) any one from:
• elements with dissimilar properties are separated or grouped elements with similar properties
• gaps left for elements to be added when discovered
• relative atomic mass order not followed in all cases (so that elements go in groups with other similar elements)
• Mendeleev in proton number order groups related to electronic structure or group number equals number of outer electrons
• new groups created or iron, cobalt and nickel in a group or eight groups instead of seven
• correct elements in periods two and three reactivity trends in groups or reactivity trends across periods separates metals and non-metals
1
Total 4
Overall marks 45
[175]
This page has been left blank intentionally
[176]
Specimen Paper CHY3H CHY3H
Other Names
Centre Number Candidate Number
Candidate signature
Leave blank
General Certificate of Secondary Education Specimen Paper CHEMISTRY Unit Chemistry 3 Higher Tier Date and Time
For this paper you must have: • a ruler • the data sheet (enclosed)
You may use a calculator.
Time allowed: 45 minutes Instructions • Use blue or black ink or ball-point pen. • Fill in the boxes at the top of this page. • Answer all questions. • Answer the questions in the spaces provided. • Do all rough work in this book. Cross through any work you do not
want marked. Information • The maximum mark for this paper is 45. • The marks for questions are shown in brackets. • You are expected to use a calculator where appropriate. • You are reminded of the need for good English and clear
presentation in your answers. Advice In all calculations, show clearly how you work out your answer.
For Examiner�s Use
Number Mark Number Mark
1 5
2 6
3 7
4 Total (Column 1)
Total (Column 2)
TOTAL
Examiner�s Initials
H
[177]
Specimen Paper CHY3H
2 LEAVE MARGIN BLANK
Answer all questions in the spaces provided.
1 The diagram shows a simplified flow diagram of a water treatment works which supplies drinking water.
(a) Explain the purpose of: (i) filtration
................................................................................................................................... ...................................................................................................................................
(ii) chlorination.
................................................................................................................................... ...................................................................................................................................
(2 marks)
(b) Samples of the treated drinking water must be tested at regular intervals. (i) Suggest why.
................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ...................................................................................................................................
(2 marks)
[178]
Specimen Paper CHY3H Turn over ►
3 LEAVE MARGIN BLANK
(ii) Suggest how the use of ICT and/or data logging equipment could help with this testing.
................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ...................................................................................................................................
(2 marks) (c) Drinking water can also be produced using distillation.
Explain why this process is expensive. ............................................................................................................................................ ............................................................................................................................................
(1 mark)
(d) In some parts of the country the water supplied to homes is hard water.
(i) Name one ion that can make water hard. ...................................................................................................................................
(1 mark)
(ii) Explain how hard water can affect central heating boilers. ................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ...................................................................................................................................
(2 marks)
(iii) State one advantage of hard water. ...................................................................................................................................
(1 mark)
Turn over for the next question
11
[179]
Specimen Paper CHY3H
4 LEAVE MARGIN BLANK
2 The table below was devised by John Newlands in 1864. He arranged the elements in order of their relative atomic masses. He found a repeating pattern, with elements having similar properties in the vertical columns (Groups). He called this pattern the �Law of Octaves�, because elements with similar properties seemed to be repeated every eighth element.
H Li Be B C N O
F Na Mg Al Si P S
Cl K Ca Cr Ti Mn Fe
Co/Ni Cu Zn Y In As S
Br Rb Sr Ce/La Zr Di/Mo Ro/Ru
Pd Ag Cd U Sn Sb Te
I Cs Ba/V Ta W Nb Au
Pt/Ir Tl Pb Th Hg Bi Os (a) Many scientists were critical of Newlands� Law of Octaves.
Suggest why other scientists were critical of the Law of Octaves. You should give examples from the table and use your knowledge of the chemistry of the elements. ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................
(3 marks)
[180]
Specimen Paper CHY3H Turn over ►
5 LEAVE MARGIN BLANK
(b) The diagram below shows a version of Mendeleev�s Periodic Table of 1871. Mendeleev placed most of the elements in order of relative atomic mass.
H
Li Be B C N O F
Na Mg Al Si P S Cl
K Cu
Ca Zn
? ?
Ti ?
V As
Cr Se
Mn Br Fe Co Ni
Rb Ag
Sr Cd
Y In
Zr Sn
Nb Sb
Mo Te
? I Ru Rh Pd
This table became accepted by other scientists.
Give one way in which Mendeleev�s table improved on Newlands� table. .. .......................................................................................................................................... ............................................................................................................................................
(1 mark)
Turn over for the next question
4
[181]
Specimen Paper CHY3H
6 LEAVE MARGIN BLANK
3 Caesium is an element in Group 1 of the periodic table. (a) Which of the electronic structures represented by A to D is correct for a caesium atom?
The periodic table on the Data Sheet may help you to answer this question.
Electronic structure
A 2, 8, 18, 8, 1
B 2, 8, 18, 18, 9
C 2, 8, 18, 27
D 2, 8, 18, 18, 6, 3 The electronic structure for a caesium atom is represented by letter .................................
(1 mark)
(b) When a small piece of lithium is added to cold water, it fizzes around on the surface of the water. A small piece of caesium explodes when added to water. Explain in terms of electronic structure why a caesium atom is more reactive than a lithium atom. ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................
(2 marks)
3
[182]
Specimen Paper CHY3H Turn over ►
7 LEAVE MARGIN BLANK
4 Many soft drinks contain citric acid.
(a) In 1883, a young chemist called Svante Arrhenius suggested that a molecule can break
into ions when dissolved in a solvent. He later developed this theory to explain what happens when an acid dissolves in water.
Older scientists believed that molecules could not break up and could not carry an electrical charge. (i) Use the ideas of Arrhenius to explain why the Lemon �n Lime drink is acidic. ................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ...................................................................................................................................
(2 marks) (ii) Suggest why older chemists would not accept Arrhenius� ideas. ................................................................................................................................... ................................................................................................................................... ...................................................................................................................................
(1 mark)
(b) Citric acid is a weak acid. Explain, in terms of ions, why Lemon �n Lime is safe to drink, whereas a solution
containing a strong acid may be corrosive. ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................
(2 marks)
5
[183]
Specimen Paper CHY3H
8 LEAVE MARGIN BLANK
5 (a) This label has been taken from a bottle of vinegar.
Vinegar is used for seasoning foods. It is a solution of ethanoic acid in water. In an experiment, it was found that the ethanoic acid present in a 15.00 cm3 sample of vinegar was neutralised by 45.00 cm3 of sodium hydroxide solution, of concentration 0.20 moles per cubic decimetre (moles per litre). The equation which represents this reaction is
CH3COOH + NaOH → CH3COONa + H2O
Calculate the concentration of the ethanoic acid in this vinegar: (i) in moles per cubic decimetre (moles per litre)
................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ................................................................................................................................... Concentration = ................................... moles per cubic decimetre
(2 marks)
(ii) in grams per cubic decimetre (grams per litre). Relative atomic masses: H = 1; C = 12; O = 16. ................................................................................................................................... ................................................................................................................................... ................................................................................................................................... Concentration = ................................... grams per cubic decimetre
(2 marks)
[184]
Specimen Paper CHY3H Turn over ►
9 LEAVE MARGIN BLANK
(b) Further titrations were carried out to investigate other brands of vinegar. The same method was used as in part 5(a). The titration was performed three times for each brand of vinegar.
Volume of 0.20 mol dm-3 sodium hydroxide solution needed to neutralise 15 cm3 of the vinegar in cm3
Brand 1 Brand 2 Brand 3 Brand 4
Titration 1 45.4 46.3 45.8 46.1
Titration 2 44.7 44.5 45.4 45.0
Titration 3 45.1 45.1 45.6 45.1 (i) Which brand of vinegar appears to contain the highest concentration of ethanoic
acid? Brand ..................... Explain how you decided. ................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ...................................................................................................................................
(2 marks)
(ii) Are the results of these titrations good enough to be certain which brand contains the most ethanoic acid? Explain your answer. ................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ...................................................................................................................................
(2 marks)
8
[185]
Specimen Paper CHY3H
10 LEAVE MARGIN BLANK
6 Four labels have come off four bottles.
Aluminium sulfate
solution
Al2(SO4)3 (aq)
Ammonium sulfate
solution
(NH4)2SO4 (aq)
Magnesium sulfate
solution
MgSO4 (aq)
Sodium sulfate
solution
Na2SO4 (aq)
Describe and give the results of the chemical tests that you would do to identify which bottle
contained which substance. ...................................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ......................................................................................................................................................
(6 marks)
6
[186]
Specimen Paper CHY3H Turn over ►
11
Turn over for the next question
[187]
Specimen Paper CHY3H
12 LEAVE MARGIN BLANK
7 �HYDRODGEN - FUEL OF THE FUTURE�. It has been suggested that hydrogen could be used as a fuel instead of the fossil fuels that are used at present. The equation below shows how hydrogen burns in air.
2H2 + O2 → 2H2O + heat
(a) Hydrogen was successfully used as a fuel for a Soviet airliner in 1988.
Suggest why burning hydrogen might cause less pollution problems than burning fossil fuels.
............................................................................................................................................
............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................
(2 marks)
(b) Hydrogen can be made by splitting up water molecules. The water splitting reaction can be represented by the equations below.
2H2O → 2H2 + O2
The table gives some bond energies.
Bond Bond energy in kJ per mole
O─H 464
H─H 436
O=O 498
[188]
Specimen Paper CHY3H
13 LEAVE MARGIN BLANK
(i) Calculate the energy transferred in this reaction.
................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ................................................................................................................................... Energy transferred ............................ kJ / mol
(3 marks)
(ii) Explain, in terms of bond energies, why this reaction is endothermic.
................................................................................................................................... ................................................................................................................................... ................................................................................................................................... ...................................................................................................................................
(2 marks)
(c) The energy needed for the water splitting reaction can be obtained from renewable sources of energy such as wind or solar power. The hydrogen produced by this reaction can be stored in large tanks ready for use. Suggest why the stored hydrogen could be more useful as a fuel than using wind or solar power directly.
............................................................................................................................................ ............................................................................................................................................
(1 mark)
END OF QUESTIONS Copyright © 2005 AQA and its licensors. All rights reserved.
8
[189]
Mark Scheme CHY3H
Chemistry 3H Mark Scheme Question 1
answers extra information mark
(a)(i) to remove solids 1
(ii) to kill germs / bacteria / microbes etc
1
(b)(i) any two from:
• check for dissolved minerals
• check for microbes
• which could be harmful to health
2
(ii) any two sensible answers such as:
• monitor continuously
• record results
• immediate graphical display
• take samples automatically
etc
2
(c) cost of fuel / heat etc 1
(d)(i) calcium / magnesium accept symbols 1
(ii) produces scale (owtte)
reduces efficiency / blocks pipes etc
1
1
(iii) any sensible reason
eg good for health
1
Total 11
[190]
Mark Scheme CHY3H
Question 2
answers extra information mark
(a) comment + relevant example
gains 1 + 1 marks
third marking point can be either a comment or an example unrelated to first comment ie 3 comments would be max 2 marks
(could be many answers)
eg many elements in the groups have very dissimilar properties eg Cu + K gains 2 marks
two elements in one place on the table eg Ce or La gains 2 marks
no clear division between metals and nonmetals or metals and non-metals jumbled / mixed up (could give example from table)
Newlands didn�t allow spaces for new elements
ignore references to music 3
continued�
[191]
Mark Scheme CHY3H
Question 2 continued
answers extra information mark
(b) any one from:
• elements with dissimilar properties are separated or grouped elements with similar properties
• gaps left for elements to be added when discovered
• relative atomic mass order not followed in all cases (so that elements go in groups with other similar elements)
• Mendeleev in proton number order groups related to electronic structure or group number equals number of outer electrons
• new groups created or iron, cobalt and nickel in a group or eight groups instead of seven
• correct elements in periods two and three reactivity trends in groups or reactivity trends across periods separates metals and non-metals
1
Total 4
[192]
Mark Scheme CHY3H
Question 3
answers extra information mark
(a) A accept a or 2, 8, 18, 18, 8, 1 1
(b) any one from:
• outer shell further from nucleus
• outer shell electron less strongly attracted to nucleus
• outer shell more shielded
so outer shell electron lost more easily (owtte)
do not accept more shells or bigger / larger atoms alone
accept correct converse linked to lithium �it� must be linked to caesium �outer� must be used once at least for both marks
1
1
Total 3
[193]
Mark Scheme CHY3H
Question 4
answers extra information mark
(a)(i) (some) citric acid molecules split (into ions) / dissociate
to form hydrogen ions / H+ / protons / hydrated protons
1
1
(ii) any one from sensible ideas such as:
• reluctant to change existing ideas
• questioned status of Arrhenius
• questioned validity / credibility of evidence
etc
1
(b) citric acid only partly dissociates or produces only a low concentration of / a few aqueous hydrogen ions
hydrochloric acid completely dissociates or produces a high concentration / lot of aqueous hydrogen ions.
1
1
Total 5
[194]
Mark Scheme CHY3H
Question 5
answers extra information mark
(a)(i) eg moles NaOH = moles of acid 45
0.2 0.0091000
= × =
rounding to 0.01 loses 1 mark 1000
0.009 0.615
= × = (M)
ecf for arithmetical error
or formula:
15M1 = 0.2 × 45
M1 = 0.6 (M) 1 mark for working correct answer gains 2 marks
2
(ii) 36 correct answer gains 2 marks
ecf � (a)(i) × 60 gains 2 marks if correctly calculated
0.6 × 60 gains 1 mark
relative formula mass of ethanoic acid = 60 gains 1 mark
0.6 × incorrect molar mass gains 1 mark only
2
(b)(i) brand 3
highest average
1
1
(ii) no
errors for individual results (owtte)
bigger than difference between values (owtte)
scores no mark (yes gains max 1)
idea of errors / large errors
errors greater than differences between averages (owtte)
1
1
Total 8
[195]
Mark Scheme CHY3H
Question 6
answers extra information mark
any series of chemical tests that work should be given credit
identifying all four substances unambiguously with no errors gains 6 marks
eg
flame test: yellow / orange means sodium ions so sodium sulfate
add NaOH to remaining three samples no (white) ppt / ammonia means ammonium ion so ammonium sulfate
(white) ppt means magnesium ions / magnesium ions add excess NaOH to the two samples which gave a (white) ppt: ppt dissolves then aluminium sulfate ppt insoluble means magnesium sulfate
ignore incorrect flame test colours for other compounds
(damp red) litmus* goes blue means ammonium sulfate
*or UI / pH indicator goes blue / purple
1
1
1
1
1
1
continued�
[196]
Mark Scheme CHY3H
Question 6 continued
answers extra information mark
or
add NaOH:
no ppt: ammonia produced means ammonium sulfate the other one with no ppt is sodium sulfate
add excess NaOH to the two samples which gave the white ppt ppt dissolves then aluminium sulfate ppt insoluble then magnesium sulfate
Total 6
[197]
Mark Scheme CHY3H
Question 7
answers extra information mark
(a) water is the only product when hydrogen is burned
water does not cause pollution
or fossil fuels produce polluting gases / named polluting gases
1
1
(b)(i) bonds broken 1856 kJ
bonds formed 1370 kJ
energy transferred = 1856 � 1370 = 480 (kJ)
3 marks for correct answer
ecf allowed ignore signs
1
1
1
(ii) more energy is needed to break bonds than is given out when bonds are formed
idea of bond breaking needing energy and bond forming releasing energy
2
(c) wind / solar is variable / not reliable / stops and starts etc
or
store of hydrogen gives a constant supply (owtte)
1
Total 8
Overall marks 45
[198]
This page has been left blank intentionally
[199]
Teachers� Notes
ISA � Chemistry 1 � Testing Concrete Specimen Material
This ISA relates to: Chemistry 1, Section 12.1
Preparation sheet for an investigation into the making and testing of concrete. This work should be carried out during the teaching of the Section �How do rocks provide building materials?� (ref: 12.1).
How do rocks provide building materials?
The investigation should include changing the method of preparation of concrete from cement , sand, water and crushed rock or pebbles and relating this to the strength of the concrete made.
Suggested outline approach:
Candidates should consider how they might vary the proportions of the ingredients for making concrete. They should tackle this in a very precise manner, with just one independent variable. They should suggest or be given a prediction which relates the method of production to the strength of the concrete. They would be expected to decide upon ranges for the independent variable when given information about the different mixes used in the building trade.
Candidates could then make small bar shaped blocks of concrete, preferably quite narrow and long, to allow for easier testing. The dependent variable will assess the strength of the concrete. This again could be given to the candidates as an outline method. The simplest way would be to span the block across a pair of stools to make a bridge. Masses could then be suspended from the middle of the block. With limited facilities, it might be easier to make cement blocks without the crushed rock or pebbles.
Candidates should be given advice that their methods might not yield the clear results that other science investigations often do. This would be due to the many control variables required in the making of the concrete.
Centres are reminded that there are Health and Safety issues involved in the use of cement powder, and in the testing of the concrete blocks. As always, risk assessments must be made prior to the candidates working.
Note that if this practical is being used to assess the skills associated with the carrying out of practical work then the method should be sufficiently sophisticated to allow access to the marks expected for those candidates. Note that any help given could reduce the marks available. Candidates can work individually or in groups and can pool results if it is thought to be appropriate. Each candidate should draw up his or her own table of results and should process the data in an appropriate way, eg bar chart or line graph. This part of the activity must be carried out individually and under direct supervision (ie controlled conditions). The table of data and graphs should then be kept by the teacher and provided to the candidate for the subsequent ISA Candidates should have a copy of their results, any pooled results and a suitable graphical representation of those results at the assessment.
[200]
GCSE Science � Investigative Skills Assignment Chemistry 1 � Testing Concrete
Specimen Material
Centre number
Candidate number
Today�s date
. . . /. . . / . . .
Candidate name (please print)
Are your own results submitted with this ISA?
YES/NO (delete one)
Instructions
• Maximum time allowed: 45 minutes. • Use blue or black ink or ball-point pen. • Fill in the boxes above. • Answer all questions. • Answer the questions in the spaces provided.
Code Title of own investigation Mark
(to be filled in by teacher)
Section 1
Section 2
Total (max 34)
Signature of candidate Date
Signature of teacher marking this ISA Date
[201]
2LEAVE
MARGIN BLANK
Section 1 These questions refer to your own investigation that you carried out with concrete. You should use your own results, your graph/s and what you remember about doing your investigation to answer these questions. All answers should be in the spaces provided. 1 Describe clearly what you were trying to find out in your investigation. Identify your dependent and independent variables. Quality of written communication is important in this answer. ...................................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ......................................................................................................................................................
(4 marks) 2 Describe briefly how you measured your dependent variable. ...................................................................................................................................................... ......................................................................................................................................................
(1 mark) 3 Describe one variable that you controlled while you were making your concrete blocks. ...................................................................................................................................................... ......................................................................................................................................................
(1 mark) 4 Describe anything you noticed about how your concrete blocks broke when they were tested. ...................................................................................................................................................... ......................................................................................................................................................
(1 mark)
!
[202]
Turn over ►
3 LEAVE MARGIN BLANK
5 If you were able to compare your results with others in your class and all of the results were about the same, this would make your results:
Tick the box beside the correct answer. more accurate more precise more reliable more valid
(1 mark) 6 Suggest a change in your method that could improve the validity of your results. ...................................................................................................................................................... ......................................................................................................................................................
(1 mark) 7 Explain how human error might have affected your results. ...................................................................................................................................................... ......................................................................................................................................................
(1 mark) 8 Which, if any, of your results do you need to repeat? ......................................................................................................................................................
(1 mark) 9 Explain your answer to Question 8. (Why did you choose to repeat those particular results or why there were no results you wish to repeat?) ...................................................................................................................................................... ......................................................................................................................................................
(1 mark)
10 What was the relationship between your independent and your dependent variable? ...................................................................................................................................................... ......................................................................................................................................................
(1 mark)
[203]
4LEAVE
MARGIN BLANK
11 Look back to Question 1, where you wrote down what you were trying to find out. Now write down what you did find out from this investigation. ...................................................................................................................................................... ......................................................................................................................................................
(1 mark) 12 Carry out a final check of your results and graph/s. You will be awarded up to 6 marks for
these. (6 marks)
20
[204]
Turn over ►
5 LEAVE MARGIN BLANK
Section 2
These questions relate to an investigation that is similar to the one that you carried out. You should use the results below, as well as your own understanding of how these investigations are carried out, to answer the questions. Harry needed a concrete drive up to his garage. It worked well for several weeks and then started to crumble. He complained to the company that had supplied the concrete. They sent a technician to take samples to test. They took 10 core samples 100 mm in diameter and 100 mm long. These were put into a press and a force applied. The results are in Table 1 below. There is some suspicion that the concrete used might have been made with different amounts of water. Tests were carried out to see the effect of using different amounts of water on the strength of new concrete. (Table 2)
Table 1 Sample number
(metres from the roadside)
Force applied to crush the
concrete (N/mm2)
1 50
2 51
3 38
4 36
5 38
6 37
7 25
8 26
9 23
10 25
Average 13 Complete Table 1 by filling in the average.
(1 mark)
Turn over for the next question
Table 2 Extra water
added to concrete
(Litres/m3)
Force applied to crush the concrete
(N/mm2)
None 36.1 34.9 35.2
10 32.2 31.8 33.0
20 29.8 32.7 29.4
30 26.3 25.7 26.5
[205]
6LEAVE
MARGIN BLANK
14 How could you best describe the type of measurements in Table 1? Tick the box beside the correct answer. Categoric measurements Ordered measurements Discreet measurements Continuous measurements
(1 mark)
15 The industry recommended minimum strength for concrete on drives is 35 .0 N/mm2. The concrete company claimed that the concrete mix was therefore satisfactory and indeed
�many of the readings exceeded the industry minimum requirements�.
(a) Do you agree with the concrete company? Explain your answer. ............................................................................................................................................ ............................................................................................................................................ ............................................................................................................................................
(1 mark)
(b) Suggest why the concrete company were keen to reassure Harry that the concrete mix was satisfactory.
.............................................................................................................................................
.............................................................................................................................................
(1 mark)
(c) The concrete company said that the results which were less than the recommended 35.0 N/mm2 were due to natural variation. Harry decided to ask another firm to repeat the tests. Explain why this was a good idea.
............................................................................................................................................. .............................................................................................................................................
(1 mark) 16 Describe fully the relationship between the distance from the roadside and the strength of the
concrete. ..................................................................................................................................................... .....................................................................................................................................................
(1 mark)
[206]
Turn over ►
7 LEAVE MARGIN BLANK
17 Study Table 2. Which would be the best way of presenting these results? Tick the box beside the correct answer. Bar chart Line graph Pie chart Histogram
(1 mark) 18 There is one anomalous result shown in Table 2. Draw a ring around this result.
(1 mark) 19 From Table 2 which results show the greatest precision? Tick the box beside the correct answer. No added water 10 litres/m3
20 litres/m3
30 litres/m3
(1 mark) 20 What was the dependent variable for the second investigation? .....................................................................................................................................................
(1 mark) 21 Use knowledge from your own investigation to suggest one reason why the results for each amount of water in Table 2 vary. ...................................................................................................................................................... ......................................................................................................................................................
(1 mark) 22 The technician had another force meter with a wider range that measured to 1 N/mm2. Was this a suitable instrument to use? Explain your answer. ...................................................................................................................................................... ......................................................................................................................................................
(1 mark)
[207]
8LEAVE
MARGIN BLANK
23 What does Table 2 suggest about the problem that Harry had with his concrete drive? ...................................................................................................................................................... ......................................................................................................................................................
(1 mark) 24 How should the results for Table 2 be treated? Tick the box beside the correct answer. The best set of results should be kept, and the anomaly discarded The results of all the tests should be averaged to find the mean The results for each extra test that used water should include any anomalous result in finding the mean. The results for each extra test that used water should exclude any anomalous results in finding the mean
(1 mark)
END OF QUESTIONS
Copyright © 2005 AQA and its licensors. All rights reserved.
14
[208]
ISA � Chemistry 1 � Testing Concrete
Marking Guidelines Specimen Material
Please mark in red ink, and use one tick for one mark.
Enter the marks for Section 1 and Section 2 and the total mark on the front cover of the answer booklet.
One of the marks on this test is to be awarded for the Quality of Written Communication (QWC)
Section 1
1 Purpose of investigation clearly stated 1 mark
Independent variable stated 1 mark
Dependent variable described 1 mark
Quality of written communication for correct usage of two scientific terms eg independent,. Dependent, variable, concentration, volume 1 mark Underline each term correctly used. Once three have been underlined, tick the icon.
2 Description to include correct use of measuring device 1 mark
3 Identification of a control variable used to make concrete 1 mark
4 Any realistic observation eg they did/didn�t break in the same place 1 mark
5 More reliable 1 mark
6 Any suggestion that would make the investigation more likely to test the prediction eg controlling the amount of/excluding air; making all slabs the same size 1 mark
7 The answer should identify a particular difficulty they had in following instructions ie not a fault in the design 1 mark
8 Correct result(s) identified / none needed 1 mark
9 Identifies an individual result or a set of results that do not fit the overall pattern or Correctly states why none need to be repeated 1 mark
10 Describes the pattern/or lack of pattern in the results 1 mark
11 Correct conclusion that relates to the prediction and fits the data 1 mark
12 Suitable table of results with all relevant data included 1 mark
Columns and rows correctly labelled 1 mark
Units present and correct 1 mark
Correct choice of bar chart or graph 1 mark
Suitable scales chosen and labelled 1 mark
Correct plotting 1 mark
Max 20 marks
[209]
Section 2
13 35.0 entered into table 1 mark
14 continuous 1 mark
15 (a) �Yes but� or �No� Explains why there is a lack of confidence in the results eg there are many results below 35; there is a pattern of weakness; areas of the drive are weak etc. 1 mark
(b) Words to the effect that the company has a vested interest in its response. 1 mark
(c) Idea of cross checking results; second opinion; independent opinion 1 mark
16 Must describe the relationship accurately eg concrete generally weaker further from the road, appears to be three batches of concrete. 1 mark
17 Line graph 1 mark
18 32.7 encircled 1 mark
19 30 Litres/m3 1 mark
20 Force applied to crush the concrete; strength of concrete 1 mark
21 Any acceptable uncontrolled variable; human error 1 mark
22 No. The scale did not allow accurate readings to 0.1 N/mm2 1 mark
23 That parts of the drive had concrete that was mixed with too much water 1 mark
24 The results for each extra test that used water should exclude any anomalous results in finding the mean 1 mark
Max 14 marks
[210]
This page has been left blank intentionally
[211]
Teachers� Notes
ISA � Chemistry 1 � Saturation of Oils Specimen Material
This ISA relates to: Chemistry 1 This work should be carried out during the teaching of the section relating to the saturation and uses of oils. As with all practical investigations, a risk assessment must be carried out prior to their use, but your attention is drawn to the toxic and corrosive nature of bromine water. Suitable precautions must be taken to ensure the safe use of this solution. Ethanol and oils are flammable, so care must also be taken with these. There should be no flames in the lab. A suggested method is described below.
1 Set up a burette containing bromine water. This could be set up for candidates if appropriate.
2 Put 1cm3 of ethanol in a boiling tube. 3 Add five drops of the oil being tested to the test tube. 4 Add 5cm3 of the bromine water from the burette. 5 Stopper the test tube and shake it. 6 If the bromine water is decolourised, add another 5cm3 of bromine water,
stopper and shake. 7 Keep doing this until the bromine water is no longer decolourised. 8 Record the volume of bromine water needed in your table.
Candidates should be aware of what use the bromine water has in determining the degree of saturation/unsaturation of oils. Candidates should also be aware of the uses of the oils chosen. Note that if this practical is being used to assess the skills associated with the carrying out of practical work then the method should be sufficiently sophisticated to allow access to the marks expected for those candidates. Note that any help given could reduce the marks available. Candidates can work individually or in groups and can pool results if it is thought to be appropriate. Each candidate should draw up his or her own table of results and should process the data in an appropriate way, eg bar chart or line graph. This part of the activity must be carried out individually and under direct supervision (ie controlled conditions). The table of data and graphs should then be kept by the teacher and provided to the candidate for the subsequent ISA.
Candidates should have a copy of their results, any pooled results and a suitable graphical representation of those results at the assessment.
[212]
GCSE Science � Investigative Skills Assignment Chemistry 1 � Saturation of Oils
Specimen Material
Centre number
Candidate number
Today�s date
. . . /. . . / . . .
Candidate name (please print)
Are your own results submitted with this ISA?
YES/NO (delete one)
Instructions
• Maximum time allowed: 45 minutes. • Use blue or black ink or ball-point pen. • Fill in the boxes above. • Answer all questions. • Answer the questions in the spaces provided.
Code Title of own investigation Mark
(to be filled in by teacher)
Section 1
Section 2
Total
(max 34)
Signature of candidate Date
Signature of teacher marking this ISA Date
[213]
2 LEAVE MARGIN BLANK
Section 1 These questions refer to your own investigation into the saturation of oils. You should use your own results, your graph/s and what you remember about doing your investigation to answer these questions. All answers should be in the spaces provided. 1 Describe clearly what you were trying to find out in your investigation. Identify your dependent and independent variables. Quality of written communication is important in this answer. I was trying to find out ................................................................................................................ ...................................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ......................................................................................................................................................
(4 marks) 2 The different oils that you used, can best be described as: Tick the box beside the correct answer. A categoric variable An ordered variable A discrete variable A continuous variable
(1 mark) 3 In order to make it a fair test, you needed to control some key variables. Name the key variables that you needed to control. ...................................................................................................................................................... ......................................................................................................................................................
(2 marks)
!
[214]
Turn over ►
3 LEAVE MARGIN BLANK
4 You used bromine water as an indicator. What was the relationship between the amount of bromine water added and the amount of saturation in the oil? ...................................................................................................................................................... ......................................................................................................................................................
(1 mark) 5 Why did you repeat your readings three times? ...................................................................................................................................................... ......................................................................................................................................................
(1 mark) 6 (a) Why was there some variation in the results? .............................................................................................................................................
(1 mark) (b) What type of error caused this variation? ............................................................................................................................................
(1 mark) 7 You want to improve either the accuracy or precision of your investigation. (a) Suggest one change you could make in how you used your apparatus. ............................................................................................................................................. .............................................................................................................................................
(1 mark) (b) Suggest one change you could make in your method. ............................................................................................................................................. .............................................................................................................................................
(1 mark) 8 Look back to Question 1 where you wrote down what you were trying to find out. (a) Now write down what you did find out from this investigation. ............................................................................................................................................. .............................................................................................................................................
(1 mark)
[215]
4 LEAVE MARGIN BLANK
(b) What conclusion can you make about the saturation levels of the different oils you have used?
............................................................................................................................................. .............................................................................................................................................
(1 mark)
(c) Would it be fair to extend this conclusion to other oils that you have not tested? Explain your answer.
............................................................................................................................................ ............................................................................................................................................
(1 mark) 9 Carry out a final check of your results and graph/s. You will be awarded up to 6 marks for
these. (6 marks)
22
[216]
Turn over ►
5 LEAVE MARGIN BLANK
Section 2
These questions relate to an investigation that is similar to the one you carried out. You should use the results below as well as your own understanding of how these investigations are carried out, to answer the questions. A food company tested its own products to make sure that the information on the labels was accurate. It used a test similar to the one you used. They tested bottles taken from the production line and then compared their results with the concentrations stated on the labels of those products. The results are given in the table below. Study the table carefully and then answer the questions that follow.
Name of food
Volume of bromine water added (cm3)
Rank order
Concentration on the label (%)
Test 1 Test 2 Test 3 Average Olio 14 13 16 14.3 35 Solio 25 17 27 65 Creamio 17 18 15 16.7 42 Tournesso 3 6 4 4.3 10 Vegeo 10 9 7 8.7 23
10 Explain how the company decided which three bottles it would select from the production line for the test. ..................................................................................................................................................... .....................................................................................................................................................
(1 mark) 11 What is the range for the concentrations of unsaturated oils listed on the labels? ......................................................................................................................................................
(1 mark) 12 Calculate the average amount of bromine water needed to decolourise the Solio product. Write this into the table.
(2 marks) 13 Complete the rank order section of the table.
Write 1 for the product with the most unsaturated oils on the label and 5 for the product with the least unsaturated oils.
(1 mark) 14 Are there any anomalous results in the table? Answer yes or no ...................................................................................................................................................... If you answered yes, then on the table put a circle around any result that is anomalous. ........
(1 mark)
[217]
6 LEAVE MARGIN BLANK
15 The company wants to display the average results for the amount of bromine water used. What would be the best way to do this? Tick the box beside the correct answer. Bar chart Line graph Pie chart Scatter graph
(1 mark) 16 20 000 bottles a day come off the production line. The sample size was only 3 bottles a week.
The company was criticised for using a sample size that was too small. Suggest a way of finding out what would be a sensible sample size. ...................................................................................................................................................... ......................................................................................................................................................
(1 mark) 17 You want to compare the results of the scientists with those printed on the labels. What would be the best way of doing this? Tick the box beside the correct answer. A bar chart to show both sets of results A line graph joined dot to dot A pie chart printed in different colours A scatter graph with a line of best fit
(1 mark) 18 The owners of the company said that they were delighted with the results of the investigation.
The scientists were not too sure. The scientists explained that the products were different colours and this might have affected the results. Use their results to explain why the scientists felt that this was a problem. ...................................................................................................................................................... ...................................................................................................................................................... ......................................................................................................................................................
(1 mark)
[218]
7 LEAVE MARGIN BLANK
19 Describe one way in which the knowledge of the amount of unsaturated oils in a food can be useful to a consumer. ...................................................................................................................................................... ......................................................................................................................................................
(1 mark) 20 A consumer suggested that this type of research should not be carried out by the company that manufactures the oils, but should be done by an independent group of scientists. Explain why this point of view is important. ...................................................................................................................................................... ......................................................................................................................................................
(1 mark)
END OF QUESTIONS
Copyright © 2005 AQA and its licensors. All rights reserved
12
[219]
ISA � Chemistry 1 � Saturation of Oils
Marking Guidelines Specimen Material
Please mark in red ink, and use one tick for one mark.
Enter the marks for Section 1 and Section 2 and the total mark on the front cover of the answer booklet.
One of the marks on this test is to be awarded for the Quality of Written Communication (QWC)
Section 1
1 Correct linkage of �type of oil� to �saturation� or �unsaturation� 1 mark
Type of oil 1 mark
Amount of bromine water added 1 mark
Quality of written communication for correct use of terminology eg independent, dependent, variable, saturation, unsaturation. 1 mark
Underline each term correctly used. Once three have been underlined, tick the icon.
2 A categoric variable 1 mark
3 If one of the following is listed then (1 mark only)
or if at least three are listed then 1 extra mark eg concentration of bromine
water, amount of oil added, amount of ethanol added, same end point, concentration of ethanol, amount of shaking 2 marks
4 The more bromine water that has to be added the less the saturation of the oil 1 mark
5 Recognises a lack of precision in the technique (does not need to say why) 1 mark
6 (a) Any reasonable statement allowed - most likely being that it is not always clear when the mixture is not decolourised 1 mark
(b) Correctly links answer in (a) to it being either a random or systematic error 1 mark
7 (a) Improvement to the use of the apparatus eg being more careful with the burette to get the correct amount of bromine water into the boiling tube or being more careful with the end point 1 mark
(b) Improvement to the method e.g. using 1cm3 of bromine water at a time or using a white card to show up the bromine water or using a photoelectric device to measure the degree of colourisation 1 mark
[220]
8 (a) eg different oils use up different amounts of bromine water or have different amounts of saturation/unsaturation 1 mark
(b) eg different oils have different concentrations/amounts of unsaturated molecules 1 mark
(c) Recognition that the results are limited to those oils that have been tested 1 mark
9 Table of results showing some of the oils and final quantities of bromine water added (possibly with minor errors), but able to be used for a conclusion 1 mark
Table shows start and finish values for bromine water, as well as final quantity added 1 mark
All headings and units correct, no omissions 1 mark
Correct choice of bar chart 1 mark
Suitable scales chosen and labelled 1 mark
Correct plotting 1 mark Max 22 marks
Section 2
10 At random or some method for ensuring randomness, idea of a fair sample 1 mark 11 10 to 65 % (must include %) 1 mark
12 23 gains 1 mark, 26 gains 2 marks 1/2 marks
13 Correct order: 3; 1; 2; 5; 4 1 mark
14 17 circled for Solio - only 1 mark
15 Bar chart 1 mark
16 Carry out as many tests as possible until there is consistency, reproducibility, until the range does not increase, or until the average is consistent 1 mark
17 Scatter graph with line of best fit 1 mark
18 Idea that evidence produced some varied results; there was some overlap in some of the results; any description of the results that illustrates a lack of confidence in the results 1 mark
29 Any correct appreciation of its importance in the diet or in industry 1 mark
20 Any suggestion about mistrust of the findings eg suggestion that consumers might believe that there could be some influence to produce results that the company and/or the scientists would want to see, rather than the accurate results 1 mark Max 12 marks
[221]
Teachers� Notes
ISA � Chemistry 2 � Reaction of Limestone Rates Specimen Material
This ISA relates to: Chemistry 2 What factors affect the rate at which limestone reacts with acids?
Candidates should be given the opportunity to carry out an investigation into the above problem. They may choose any independent variable to investigate and any method of doing so. Instructions of a general nature may be given, but these must not be so prescriptive as to not allow the candidate to make any decisions for him or herself. Note that if this practical is being used to assess the skills associated with the carrying out of practical work then the method should be sufficiently sophisticated to allow access to the marks expected for those candidates. Note that any help given could reduce the marks available. Candidates can work individually or in groups and can pool results if it is thought to be appropriate. Each candidate should draw up his or her own table of results and should process the data in an appropriate way, eg bar chart or line graph. This part of the activity must be carried out individually and under direct supervision (ie controlled conditions). The table of data and graphs should then be kept by the teacher and provided to the candidate for the subsequent ISA.
Candidates should have a copy of their results, any pooled results and a suitable graphical representation of those results at the assessment.
[222]
GCSE Science � Investigative Skills Assignment Chemistry 2 � Reaction of Limestone Rates
Specimen Material
Centre number
Candidate number
Today�s date
. . . /. . . / . . .
Candidate name (please print)
Are your own results submitted with this ISA?
YES/NO (delete one)
Instructions
• Maximum time allowed: 45 minutes. • Use blue or black ink or ball-point pen. • Fill in the boxes above. • Answer all questions. • Answer the questions in the spaces provided.
Code Title of own investigation Mark
(to be filled in by teacher)
Section 1
Section 2
Total (max 34)
Signature of candidate Date
Signature of teacher marking this ISA Date
[223]
2 LEAVE MARGIN BLANK
Section 1 These questions refer to your own investigation into the reaction of limestone. You should use your own results, your graph/s and what you remember about doing your investigation to answer these questions. All answers should be in the spaces provided. 1 What were you trying to find out in your investigation?
Complete the blank spaces in the sentence below. I was trying to find out if the........................................................................................................ .............................................................................................................................. depends on the ......................................................................................................................................................
(2 marks) 2 Name one variable that you kept the same. ...................................................................................................................................................... ......................................................................................................................................................
(1 mark) 3 Describe how you controlled this variable. ...................................................................................................................................................... ......................................................................................................................................................
(1 mark) 4 Did you need to repeat any of your readings?
Answer yes or no and give the reason why.
...................................................................................................................................................... ......................................................................................................................................................
(1 mark) 5 Write down one thing that you measured during your investigation. One thing that I measured was the ............................................................................................... What piece of equipment did you choose to make this measurement? I used ............................................................................................................................................
(a) What else could you have used instead of the equipment that you chose? .............................................................................................................................................
(1 mark)
[224]
Turn over ►
3 LEAVE MARGIN BLANK
(b) Write down one reason why the equipment that you chose was a better choice than the alternative. .............................................................................................................................................
(1 mark) 6 Put a circle around any data that did not seem to fit your pattern. You can do this on your table or your graph. If you did not find any anomalous results then say so here. ...................................................................................................................................................... ......................................................................................................................................................
(1 mark) 7 Were there any random errors in your results? Answer yes or no and use an example to support your answer and suggest why it happened. ...................................................................................................................................................... ......................................................................................................................................................
(1 mark) 8 Is there a pattern in your results? Answer yes or no and explain your answer. ...................................................................................................................................................... ......................................................................................................................................................
(1 mark)
9 Do you think that you have enough data to make a conclusion? Answer yes or no and explain your answer. ...................................................................................................................................................... ...................................................................................................................................................... ......................................................................................................................................................
(1 mark)
10 Carry out a final check of your results and graph/s. You will be awarded up to 6 marks for these.
(6 marks)
Turn over for the next question
17
[225]
4
Section 2
These questions are about Arpita�s investigation into the reaction between hydrochloric acid and calcium carbonate (limestone). You should use her results below, as well as your own understanding of how these investigations are carried out, to answer the questions.
Arpita wanted to find out if the rate of reaction depended upon the concentration of the acid.
She used 5 different concentrations of acid, and measured the maximum pressure of the carbon dioxide gas produced, using the apparatus shown below.
She made sure that she weighed out exactly the same mass of calcium carbonate for each investigation. She also monitored the temperature of the acid.
She then calculated the rate of gas pressure change and showed her results in the table below. Table 1
Acid Temperature (°C)
Molarity (M)
Rate (kPa/s)-1
Before After 1st Test
0.2 0.048 28 30 0.4 0.170 28 29 0.5 0.200 27 29 0.6 0.530 27 34 0.8 0.340 27 28
2nd Test 0.2 0.041 22 25 0.4 0.160 22 24 0.5 0.180 22 25 0.6 0.290 24 26 0.8 0.380 24 26
3rd Test 0.2 0.022 23 26 0.4 0.079 23 25 0.5 0.220 25 26 0.6 0.240 25 27 0.8 0.260 24 26
[226]
Turn over ►
5 LEAVE MARGIN BLANK
(1 mark)
(1 mark)
(1 mark) 14 Arpita next worked out the average of all three tests.
Table 2 Averages of results from all three tests
Molarity (M) Rate (kPa/s)-1
0.2 0.037
0.4 0.136
0.5
0.6 0.353
0.8 0.326
Work out the average rate for 0.5M and put the figure in the table.
(1 mark)
11 Write down one way in which Arpita made this a fair test. ......................................................................................................................................................
12 Arpita carried out the investigation 3 times for each concentration. Why did she do this? ...................................................................................................................................................... ......................................................................................................................................................
13 Arpita measured the temperature of the acid before and after the reaction. (a) Why did she do this? .............................................................................................................................................
(1 mark) (b) What sort of a variable was the temperature in Arpita�s investigation? Tick the box beside the correct answer. A categoric variable A continuous variable A dependent variable A discrete variable
[227]
6
15 There appears to be an anomalous result in Table 1. (a) Put a circle around this result.
(1 mark) (b) Suggest one reason why this result was anomalous. .............................................................................................................................................
(1 mark)
(c) What should Arpita have done with this result when calculating the averages?
............................................................................................................................................. (1 mark)
(d) Do you think that this error was a random error or a systematic error? Explain your answer. I think it was a .........................................error because ...................................................... .............................................................................................................................................
(1 mark) (e) Arpita calculated her averages to 3 significant figures. Do you think this was the right thing to do? Tick the box beside the correct answer. No, because her original results were only to 2 significant figures No, because her calculator would have shown more significant figures Yes, because averages are always shown to 3 significant figures Yes, because she averaged 3 sets of results
(1 mark)
16 What would be the best way for Arpita to show her average results graphically? Tick the box beside the correct answer. Bar chart Line graph Pie chart Scatter graph
(1 mark)
[228]
7 LEAVE MARGIN BLANK
17 Arpita only measured the pressure difference in her investigation. What would be the advantage of carrying out the investigation again using a different method? ......................................................................................................................................................
(1 mark)
18 After her investigation, Arpita said, �I now know for a fact that higher concentrations of all acids make limestone dissolve more quickly�
Her friend Arpan said, �That is just your opinion. You can�t know that for a fact�. Who do you think is right? Is Arpita�s statement a fact or an opinion? Quality of written communication is important in this answer. ..................................................................................................................................................... ..................................................................................................................................................... ..................................................................................................................................................... ..................................................................................................................................................... ..................................................................................................................................................... ..................................................................................................................................................... ..................................................................................................................................................... .....................................................................................................................................................
(4 marks)
19 Some buildings are made of limestone (calcium carbonate). How could results of investigations like Arpita�s be used to persuade governments to reduce
the amount of industrial pollution released into the atmosphere? ...................................................................................................................................................... ......................................................................................................................................................
(1 mark)
END OF QUESTIONS
Copyright © 2005 AQA and its licensors. All rights reserved.
!
17
[229]
ISA � Chemistry 2 � Reaction of Limestone Rates
Marking Guidelines Specimen Material
Please mark in red ink, and use one tick for one mark.
Enter the marks for Section 1 and Section 2 and the total mark on the front cover of the answer booklet.
One of the marks on this test is to be awarded for the Quality of Written Communication (QWC)
Section 1
1 Dependent variable correctly named 1 mark
Independent variable correctly named 1 mark
2 Correct control variable, eg temperature, concentration 1 mark
3 eg water bath for temperature 1 mark
4 No mark for yes or no, mark is for correct reason, eg no, because the pattern seemed consistent, or yes, because I obtained an anomalous result 1 mark
5 No marks for stating what was measured, or the instrument used
(a) sensible alternative suggested 1 mark
(b) reason given, e.g. better precision/ accuracy 1 mark
6 Either anomalous result correctly identified, or correct statement that there are no anomalous results 1 mark
7 Either Yes if correct, with reason, or No, if correct, with reason 1 mark
8 Either Yes if correct, with reason, or No, if correct, with reason 1 mark
9 Either Yes if correct, with reason, or No, if correct, with reason 1 mark
10 Suitable table of results with all relevant data included 1 mark
Columns and rows correctly labelled 1 mark
Units present and correct 1 mark
Choice of bar chart or graph 1 mark
Suitable scales chosen and labelled 1 mark
Correct plotting 1 mark
Max 17 marks
[230]
Section 2 11 Any valid, eg same mass of limestone 1 mark
12 Idea of acting as a cross check or alternatives 1 mark 13 (a) Idea of monitoring 1 mark
(b) A continuous variable 1 mark
14 0.248 1 mark
15 (a) circle around 0.240 for 0.6M in third test 1 mark
(b) pressure less due to leakage of gas 1 mark
(c) Arpita should have ignored this result and just averaged the other two 1 mark
(d) random, because it is the only one that does not fit a pattern 1 mark
(e) no, because her original results were only to 2 significant figures 1 mark
16 Line graph 1 mark
17 Idea of increased reliability 1 mark
18 Arpan is right � it is an opinion 1 mark
only one kind of acid tested 1 mark
cannot generalise from a single test 1 mark
Quality of written communication - 1 mark correct use of any three technical terms, eg opinion; generalise; evidence; conclusion.
Underline each term correctly used.
Once three have been underlined, tick the icon.
19 Idea that increased concentrations will speed up rate of erosion/decay of buildings 1 mark
Max 17 marks
[231]
Teachers� Notes
ISA � Chemistry 3 � Hardness of Water Specimen Material
This ISA relates to: Chemistry 3 What is in the water we drink? Candidates should be given the opportunity to carry out an investigation into the hardness of water. They may choose any method of doing so, and may investigate either permanent or temporary hardness, or may choose to investigate water softeners. A suggested approach would be to supply the candidates with a selection of different samples of water containing differing degrees of hardness and ask them to compare them. Instructions of a general nature may be given, but these must not be so prescriptive as to not allow the candidate to make any decisions for him or herself. However the investigation is carried out, it should include a control investigation. For example, if investigating different samples of water for hardness, they should compare this with a sample of distilled water. Note that if this practical is being used to assess the skills associated with the carrying out of practical work then the method should be sufficiently sophisticated to allow access to the marks expected for those candidates. Note that any help given could reduce the marks available. Candidates can work individually or in groups and can pool results if it is thought to be appropriate. Each candidate should draw up his or her own table of results and should process the data in an appropriate way, eg bar chart or line graph. This part of the activity must be carried out individually and under direct supervision (ie controlled conditions). The table of data and graphs should then be kept by the teacher and provided to the candidate for the subsequent ISA.
Candidates should have a copy of their results, any pooled results and a suitable graphical representation of those results at the assessment.
[232]
GCSE Science � Investigative Skills Assignment Chemistry 3 � Hardness of Water
Specimen Material
Centre number
Candidate number
Today�s date
. . . /. . . / . . .
Candidate name (please print)
Are your own results submitted with this ISA?
YES/NO (delete one)
Instructions
• Maximum time allowed: 45 minutes. • Use blue or black ink or ball-point pen. • Fill in the boxes above. • Answer all questions. • Answer the questions in the spaces provided.
Code Title of own investigation Mark
(to be filled in by teacher)
Section 1
Section 2
Total (max 34)
Signature of candidate Date
Signature of teacher marking this ISA Date
[233]
2 LEAVE MARGIN BLANK
Section 1 These questions refer to your own investigation into the hardness of water. You should use your own results, and graph/s and what you remember about doing your investigation to answer these questions. All answers should be in the spaces provided. 1 What were you trying to find out in your investigation?
...................................................................................................................................................... ...................................................................................................................................................... ......................................................................................................................................................
(1 mark) 2 Name one variable that you kept the same. ......................................................................................................................................................
(1 mark) 3 Describe how you controlled this variable. ...................................................................................................................................................... ......................................................................................................................................................
(1 mark) 4 In your investigation, you deliberately changed one variable (the independent variable) to find
out how this altered another variable (the dependent variable). (a) In your investigation, what was the independent variable? .............................................................................................................................................
(1 mark) (b) What kind of a variable was this? Tick the box beside the correct answer. A continuous variable A discrete variable A ordered variable A ranked variable
(1 mark)
[234]
Turn over ►
3 LEAVE MARGIN BLANK
5 Your investigation included a control investigation.
(a) What is the purpose of a control investigation?
............................................................................................................................................. .............................................................................................................................................
(1 mark)
(b) Describe what you did in your control investigation.
............................................................................................................................................. .............................................................................................................................................
(1 mark) 6 Did you need to repeat any of your readings? Answer yes or no and explain why. ............................................................................................................................................. .............................................................................................................................................
(1 mark) 7 Put a circle around any data that did not seem to fit your pattern. You can do this on your table or your graph. If you did not find any anomalous results then say so here. ..................................................................................................................................................... .....................................................................................................................................................
(1 mark) 8 Were there any random errors in your results? Answer yes or no. ...................................................................................................................................................... If you answered yes, say which ones they were. If you answered no, say how you know this. ...................................................................................................................................................... ......................................................................................................................................................
(1 mark) 9 Is there a pattern in your results? Answer yes or no and then explain your answer by describing your graph. ...................................................................................................................................................... ......................................................................................................................................................
(1 mark)
[235]
4 LEAVE MARGIN BLANK
10 Do you think that you have enough data to make a conclusion? Answer yes or no and explain your answer. ...................................................................................................................................................... ......................................................................................................................................................
(1 mark) 11 Suggest one improvement that you could make in your investigation if you had to carry it out again. ...................................................................................................................................................... ......................................................................................................................................................
(1 mark) 12 Carry out a final check of your results and graph/s. You will be awarded up to 6 marks for
these. (6 marks)
19
[236]
5
Turn over ►
LEAVE MARGIN BLANK
Section 2
These questions are about water softening. You should use the results below, as well as your own understanding of how these investigations are carried out, to answer the questions. Mrs Jones was concerned that the water supplied by her Water Company was very hard. She used the Internet to find the following information. She clicked on the map, and it appeared to show that she lived in a �Soft to moderately soft� area. 13 How can you explain the fact that her water was hard and yet according to the map she lived
in an area where the water was soft? ...................................................................................................................................................... ......................................................................................................................................................
(1 mark) 14 Mr and Mrs Jones had different opinions about the water. Mrs Jones said, �The water must be
hard because it takes a lot of soap to produce lather�. Mr Jones said, �I don�t think it is hard, because there is no fur or scale in the kettle.� What scientific evidence would be needed to decide who was right?
...................................................................................................................................................... ......................................................................................................................................................
(1 mark)
Hardness of water This is mainly caused by salts of calcium and magnesium and can be of two types. Temporary hardness is usually caused by hydrogencarbonates and can be removed by boiling the water. Permanent hardness is usually caused by sulphates and cannot be removed by boiling. Click here to see a map of the UK showing what the water is like in your area. Remember that there can be local variations.
Soft to moderately soft0 to 100 mg/l of calcium
carbonate equivalent
Slightly hard to moderately hard
100 to 200 mg/l of calcium carbonate equivalent
Hard to very hard Above 200 mg/l of calcium carbonate
equivalent
[237]
6
LEAVE MARGIN BLANK
Mrs Jones telephoned the Water Company and they agreed to take a sample of her water to analyse. The scientists who arrived to do this first of all opened the taps to let several litres of water flush through the pipes. They then took three samples: one from the kitchen tap, one from the bathroom tap, and one from the garden tap. 15 Suggest one reason why they allowed a large amount of water to run through the pipes before
taking a sample. ..................................................................................................................................................... .....................................................................................................................................................
(1 mark) 16 Why did they take three samples, rather than just one? ..................................................................................................................................................... .....................................................................................................................................................
(1 mark) Here are the results of the tests they carried out.
Test results for Mrs Jones We have tested each of the samples using two different methods, and the average results are shown below.
Site of sample Total hardness (mg/l Calcium Carbonate equivalent Average total hardness
Kitchen tap 93 Bathroom tap 101 Garden tap 103
Your water is soft and you do not need to treat it in any way. 17 Why did they use two different methods of testing? Tick the box beside the correct answer. To make the results more accurate To make the results more precise To make the results more reliable To make the results more valid
(1 mark) 18 Fill in the table to show the average total hardness.
(1 mark)
[238]
7
Turn over ►
LEAVE MARGIN BLANK
19 Using the figure you worked out in Question 18 and the chart that Mrs Jones found on the Internet, describe the hardness of her water. ...................................................................................................................................................... ......................................................................................................................................................
(1 mark) 20 What would be the best way to show the Water Company�s results graphically? Tick the box beside the correct answer. Bar chart Line graph Pie chart Scatter graph
(1 mark) Mrs Jones decided she would get a second opinion. She asked a company that specialises in water treatment to test the water for her. They came and took one sample of water from her garden tap. Here is part of their report. 21 What is the advantage of obtaining a second opinion? ...................................................................................................................................................... ......................................................................................................................................................
(1 mark) 22 What is the meaning of the term ± 10 % that appears on the report? Tick the box beside the correct answer. It is a way of showing an uncertainty in the results It means that only 10 % of the water tested was hard It means that the water is definitely hard It shows that other chemicals besides calcium carbonate were present
(1 mark)
Watersoft Ltd. Report to Mrs Jones on water supply:
We have found that your water supply has a hardness of 100 mg/l of calcium carbonate equivalent (± 10 %) and this means that your water is hard. We recommend that you purchase one of our Deluxe Water Softeners. The current price of these is . . .
[239]
8
LEAVE MARGIN BLANK
23 Do you think that �Watersoft� came to a fair conclusion in recommending that Mrs. Jones purchase a water softener? Answer by explaining whether you think that the results of the �Watersoft� investigations
agree or disagree with those of the Water Board, and which test results you have more confidence in.
Quality of written communication is important in this answer. ...................................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ......................................................................................................................................................
(4 marks) 24 Suggest one reason why the Water Board and �Watersoft Ltd.� made different recommendations to Mrs Jones. ...................................................................................................................................................... ......................................................................................................................................................
(1 mark)
END OF QUESTIONS
Copyright © 2005 AQA and its licensors. All rights reserved.
!
15
[240]
Marking Guidelines
ISA � Chemistry 3 � Hardness of Water Specimen Material
Please mark in red ink, and use one tick for one mark.
Enter the marks for Section 1 and Section 2 and the total mark on the front cover of the answer booklet.
One of the marks on this test is to be awarded for the Quality of Written Communication (QWC)
Section 1
1 Correctly states the purpose of the investigation 1 mark
2 Correct control variable, eg temperature, volume of soap solution 1 mark
3 eg water bath for temperature/measuring cylinder for volume of water 1 mark
4 (a) Input variable correctly identified, eg different type of water, or quantity of softener added 1 mark
(b) Answer will depend upon nature of the investigation, eg categoric if comparing samples from different places 1 mark
5 (a) Idea of being able to make comparison or �to see what the difference is� 1 mark
(b) Control explained, eg using distilled water as a comparison, or adding no softener 1 mark
6 No mark for yes or no, mark is for correct reason, eg no, because the pattern seemed consistent, or yes, because I obtained an anomalous result 1 mark
7 Either anomalous result correctly identified, or correct statement that there are no anomalous results 1 mark
8 Either yes if correct, with reason, or no, if correct, with reason 1 mark
9 Either yes if correct, with reason, or no, if correct, with reason 1 mark
10 Either yes if correct, with reason, or no, if correct, with reason 1 mark
11 Any suitable improvement suggested 1 mark
[241]
12 Suitable table of results with all relevant data included 1 mark Columns and rows correctly labelled 1 mark Units present and correct 1 mark Correct choice of bar chart or graph 1 mark Suitable scales chosen and labelled 1 mark Correct plotting 1 mark
Max 19 marks
Section 2 13 Idea of local variations 1 mark
14 Chemical tests to see whether carbonates or sulphates are present 1 mark
15 Idea of obtaining a fair sample 1 mark
16 Idea of benefit of repeated readings (eg to improve accuracy) 1 mark
17 To make the results more reliable 1 mark
18 99 1 mark
19 Soft to moderately soft 1 mark
20 Bar chart 1 mark
21 Idea that it provides extra evidence or conclusions may be more reliable with more data 1 mark
22 It is a way of showing an uncertainty in the results 1 mark
23 Results agree � both on the borderline between soft and moderately hard 1 mark
Water Board, tests are more reliable 1 mark
Reason for greater reliability, eg more samples taken/two different methods used 1 mark
Quality of written communication - correct use of any three technical terms, 1 mark
eg reliable/reliability; sample/sampling; uncertainty; variation.
Underline each term correctly used.
Once three have been underlined, tick the icon.
24 Idea that they want her to spend money with them on a water softener. 1 mark
Max 15 marks
[242]